Universal Toilet Dual Flush Button - Taps2Traps - Bronze

The flush button has a brushed brass finish, which is a type of bronze color.

No, it is specifically designed for push-rod operated, exposed cisterns with a 38-40mm hole. It is not suitable for cable-operated or concealed cisterns.

Basic tools like pliers or a small saw for trimming the rods, and possibly an adjustable wrench for the retaining nut, are typically needed.

You will need to observe your cistern's internal mechanism and measure the required length based on how the old rod connected to the flush valve and button assembly.

It means the rods that connect the button to the flush mechanism are longer than necessary and can be cut down to fit your specific cistern's dimensions perfectly.

Regular cleaning with a damp cloth is recommended to maintain its appearance. Avoid harsh chemicals.

Ensure the push rods are not obstructed by anything inside the cistern and that they have been trimmed to the correct length. Verify that the retaining nut is not over-tightened.

The push rods may need to be trimmed slightly longer to provide more leverage on the flush valve. Ensure the flush valve itself is functioning correctly.

The push rods might be too long, holding the flush valve open. Trim them slightly shorter. Alternatively, check if the flush valve seal is worn or damaged.

Confirm that your cistern hole is within the 38-40mm range specified. This button is designed for this specific size range.