Antec ARGB & Fan Controller - 5 PWM Fan Ports - 5 ARGB LED Ports

The Antec ARGB & Fan Controller supports up to 5 x 4-Pin PWM fans and 5 x 3-Pin ARGB LED devices.

No, the Antec ARGB & Fan Controller operates independently. You can switch between lighting modes and fan speeds using physical buttons or controls on the unit itself. It does not require any software installation.

The controller is powered via a SATA power connector directly from your PC's power supply unit.

Yes, as long as they use the standard 4-pin PWM connector for fans and the standard 3-pin ARGB connector for lighting, you can generally mix brands. However, ARGB color synchronization may vary slightly between different manufacturers' devices.

The dimensions are 102 mm (Length) x 41 mm (Width) x 15 mm (Height).

The Antec ARGB & Fan Controller comes with a 2-year warranty.

No, the controller is designed with specific ports for 5 fans and 5 ARGB devices. Connecting more than the specified limit may cause damage or malfunction.

Verify that the SATA power cable is securely connected to the controller and the power supply. Ensure all fan and ARGB cables are correctly seated in their respective ports on the controller, matching the pin configuration (e.g., 4-pin for fans, 3-pin for ARGB). Check that the fans and ARGB devices themselves are functional by testing them directly on the motherboard or another controller if possible.

Confirm that all ARGB devices are connected to the 3-pin ARGB ports and that the controller's ARGB mode is selected. Ensure that the connected ARGB devices are compatible with standard 3-pin ARGB interfaces. If issues persist, try connecting ARGB devices one by one to identify a potentially faulty component or cable.

Ensure that the fans are connected to the 4-pin PWM fan ports. Check that the fan speed settings on the controller are adjusted appropriately. Some fans may have minimum speed requirements; ensure your selected speed is above this threshold.

Double-check the SATA power connection for a solid connection. Ensure the total power draw from all connected fans and ARGB devices does not exceed the controller's safe current limits (FAN: = 3A total, = 1A per port; LED: = 4A total, = 2A per port). If the issue persists, the controller may be faulty.