Best current price£28.18from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£28.18Visit shop Yonico Classical Ogee Router Bits Edge Forming 3/8-Inch 1/2-Inch Shank 13185 765573827972
Visit shop1 offer from £28.18
View price history by clicking the chart icon.
This YONICO Classical Ogee Edge Forming Router Bit is designed for woodworkers seeking professional-grade decorative edges for furniture, cabinetry, and molding. Its key benefit lies in its C3 micro-grain tungsten carbide cutters for precise, clean cuts and durable performance. A potential caveat is that optimal results depend on proper router speed and feed rate, which may require practice for newer users.
| Model Part Number | 13186 |
|---|---|
| Brand | YONICO |
This bit is suitable for a wide range of softwoods and hardwoods. For very dense or abrasive woods, performance may be reduced, and more frequent maintenance might be required.
The Teflon coating reduces friction and prevents resin and wood buildup on the bit, allowing for smoother cuts and easier cleanup, which also extends the bit's life.
The maximum cutting depth is determined by the router's capabilities and the specific design of the ogee profile. It is recommended to make cuts in multiple passes rather than attempting a deep single pass to ensure safety and cut quality.
While primarily designed for standard routers, the 1/2-inch shank may be compatible with some CNC machines equipped with appropriate collets. Always check your CNC machine's specifications.
It refers to features like relief slots that help to reduce the tendency of the router bit to 'grab' the wood and violently push the router back towards the operator, making the process safer.
Use a dedicated router bit cleaner or a non-flammable solvent. A brass brush can help dislodge stubborn residue after soaking. Ensure the bit is thoroughly dry before storage.
The Lifetime Warranty generally covers defects in materials and workmanship under normal use. It does not typically cover wear and tear from use or damage due to misuse.
Increase router speed, reduce feed rate, ensure bit is sharp, or reduce the depth of cut.
Reduce feed rate, increase router speed (within recommended limits), or ensure the Teflon coating is intact and clean.
Verify that your router has a 1/2-inch collet. If it does, ensure no debris is in the collet or shank.
Setup: Ensure your router is unplugged before installing the bit. Insert the 1/2-inch shank firmly into the router's collet and tighten securely. Double-check that the bit is centered and run out is minimal.
Compatibility: This bit features a 1/2-inch shank and is compatible with any standard router or router table equipped with a 1/2-inch collet.
Care: After each use, clean the bit to remove wood dust and resin. A soft brush or a non-flammable solvent can be used. Avoid abrasive cleaners. Store the bit in a dry place, ideally in its protective case, to prevent rust and damage. Regular cleaning will maintain sharpness and prolong the bit's lifespan.
