Best current price£19.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£19.50Visit shop B&Q - 10mm Swivel Eye Bolt With Link 0.45 Ton (M10 Lifting Rotating Grade 80 Hoisting Point)
Visit shop2 offers from £19.50
View price history by clicking the chart icon.
This SecureFix Direct 10MM Grade 80 Swivel Eyebolt with Link is designed for professionals requiring a robust and versatile lifting component. Its key benefit is the 360-degree swivel action, allowing for safe lifting from multiple angles, which significantly enhances flexibility in demanding industrial environments. A primary consideration is adhering strictly to the stated Safe Working Load (SWL) of 0.45 Ton to ensure safety and prevent component failure. The product features high-strength Grade 80 steel construction, a swiveling design for multi-directional lifting, and compliance with BS EN 1677 standards.
| Model Part Number | SFSEBL10 |
|---|---|
| Brand | SecureFix Direct |
The Safe Working Load is 0.45 Ton (450 kg) when the load is applied directly vertically (at 0 degrees). The SWL decreases significantly with any angle of lift.
The eyebolt is manufactured from high-strength Grade 80 steel, known for its durability and load-bearing capabilities.
Yes, the swivel feature allows for lifting from various angles. However, the Safe Working Load must be reduced accordingly. Consult a load chart or rigging professional for precise angle-based SWL ratings.
This product conforms to BS EN 1677 standards for lifting components.
The mounting point must be integral to the structure and rated to withstand the applied load, including any dynamic forces. It's recommended to consult with a structural engineer or qualified professional to verify the strength of the mounting substrate.
Key dimensions include a 10mm thread size (A), overall length of 79mm (E), and a link outer width of 31mm (G).
Regularly inspect for wear, damage, or corrosion. Clean with a dry cloth and avoid harsh chemicals or excessive moisture. Replace immediately if any signs of damage are observed.
Check that the mounting hole or thread is clean and free from debris. Ensure you are using the correct thread size (10mm) and that the mounting material is suitable. Do not force the eyebolt; verify thread alignment.
Inspect the swivel area for any obstruction, dirt, or rust. Clean thoroughly and apply a light, appropriate lubricant if necessary. If the stiffness persists, the component may be damaged and should be replaced.
Always refer to the stated Safe Working Load (SWL) of 0.45 Ton @ 0 Degrees. Never exceed this limit. Consider the angle of the lift; SWL decreases significantly with increased angles. Use a load chart if available and consult a rigging professional for complex lifts.
Immediately remove the eyebolt from service. Any signs of deformation, cracks, excessive wear on the threads or swivel, or corrosion indicate the component is compromised and must be replaced.
Setup: To install the eyebolt, screw the 10mm thread securely into a solid, load-bearing material or fixture that is rated to support the intended load. Ensure the threads are fully engaged and the base of the eyebolt is firmly seated against the mounting surface. Use appropriate tools for tightening, but avoid over-tightening which could damage the threads or the mounting material.
Compatibility: This eyebolt is designed to be used with lifting chains, slings, or ropes that can attach to the integrated link. The mounting point must be capable of withstanding the applied load and any dynamic forces. It is compatible with Metric 10mm tapped holes or solid material with sufficient depth and strength.
Care: Regularly inspect the eyebolt, link, and swivel mechanism for any signs of wear, deformation, cracks, or corrosion. Clean with a dry cloth. Avoid exposing the component to corrosive environments or excessive moisture. Any damage or significant wear necessitates immediate replacement of the eyebolt.
