Setup, Compatibility & Care
Installation requires mounting the main housing and the receiver hook on opposing walls or surfaces. Ensure both pieces are perfectly aligned horizontally to maintain tension. Use appropriate wall anchors for the surface type (e.g., masonry plugs for brick or toggle bolts for drywall).
For care, wipe the brass housing periodically with a soft, damp cloth to maintain its shine and remove dust. Avoid using abrasive cleaning agents or harsh chemicals, as these can strip the finish. The nylon cord should be kept clean and free of debris; if it gets wet, extend it fully until it is completely dry before retracting it into the housing to prevent mold or mildew build-up inside the casing.