Corfe Spear Top Tall Flat Top Double Gate - Black - W2134 x H1778mm

The given width of 2134mm refers to the gap the gates fit. The physical size of the gates themselves are slightly smaller to accommodate the hinges and latch mechanism.

No, gate posts are not included with this product. You will need to source and install suitable posts separately.

Yes, the gate is supplied primed but requires painting after installation. This is essential for protecting the steel from rust and ensuring its longevity, especially for non-electro galvanized parts.

Information regarding the warranty period is not specified in the product description. Please refer to the retailer's warranty policy for details.

Yes, Corfe gates are made to order, and a made-to-measure service is available if you require custom dimensions beyond the standard size.

The spear heads are black.

No, the fittings pack is included, but screws are not supplied and will need to be purchased separately.

Adjust the adjustable hinges. Loosen the bolts on the hinge brackets and reposition them until the gate is level and swings smoothly. Ensure posts are stable.

Clean any debris from the hinge points and apply a suitable lubricant like WD-40 or a silicone-based spray. Check for any obstructions.

Check the alignment of the closing bolt and the latch receiver. Adjust the position of the gate or latch mechanism if necessary. Ensure no obstructions are preventing closure.

This typically indicates that the protective paint coating has worn away or was not applied correctly. Clean the affected area thoroughly, treat with a rust remover, prime, and repaint immediately with exterior metal paint.