Shopping.co.uk

FloPlast Solvent Weld Waste Bend - 135 Degree x 50mm Black

FloPlast Solvent Weld Waste Bend - 135 Degree x 50mm Black

135 degree bends are used to create a change of direction in a waste pipe system. Two bends are of...

Best current price£1.10from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Professional Building Supplies£1.10Visit shop

Floplast Black Solvent Weld Waste Bend - 135 Degree X 40Mm

Visit shop

All Offers

10 offers from £1.10 - £33.41

View price history by clicking the chart icon.

Professional Building SuppliesFloplast Black Solvent Weld Waste Bend - 135 Degree X 40Mm
Free delivery in 1–3 days
£1.10
Visit shop
hartlepoolplumbing.suppliesFloplast Black 40Mm Abs Solvent Weld 135° (45°) Bend/Elbow
Free delivery in 1–3 days
£1.22
Visit shop
eBayFloPlast ABS Solvent Weld 135' Obtuse Bend 40mm Black
Free delivery in 1–3 days
£4.91
Visit shop
The RangeFloplast Abs Solvent Weld 135' Obtuse Bend 40Mm Black - Grey
Free delivery in 1–3 days
£5.22
Visit shop
OnBuy.comFloplast Abs Solvent Weld 135' Obtuse Bend 40Mm Black 5055149913792
Free delivery in 1–3 days
£5.79
Visit shop

Product Information

Full details

This guide is for plumbers and DIY enthusiasts working on domestic wastewater systems. The FloPlast 135 Degree Solvent Weld Waste Bend (50mm Black) offers a robust solution for redirecting waste pipes at an obtuse angle, preventing common flow obstructions. A key consideration is that solvent weld joints are permanent once made, requiring careful planning before application.

All features

Model Part NumberWS20B
BrandFloPlast

Extended Product Information

FAQs

What does '135 degree' mean for this bend?

The 135-degree angle allows for a significant change in direction in your pipework. Two such bends can be used together to create an offset or a near 90-degree turn.

Can I use this with PVC pipes?

No, this fitting is designed for use with ABS solvent weld pipes. Using it with other materials may result in a weak or failed joint.

How long does the solvent weld joint take to set?

The joint should be held in place for at least 5 minutes after assembly. The system requires 12 hours to cure fully before testing or use.

Is this fitting suitable for hot water waste?

While ABS is durable, it is generally recommended for cold and lukewarm wastewater applications. Consult specific system requirements for higher temperature applications.

What safety precautions should I take when using solvent cement?

Always work in a well-ventilated area, away from open flames or heat sources. Wear gloves and eye protection, and avoid skin contact. Wash any contacted skin thoroughly with soap and water.

Can I disassemble a solvent weld joint if I make a mistake?

No, solvent weld joints are permanent and cannot be demounted once the solvent cement has cured.

What does it mean that the product is Kitemarked?

The Kitemark is a voluntary third-party certification mark that indicates the product conforms to relevant British Standards (BS EN 1455 in this case), ensuring a level of quality and reliability.

Troubleshooting

Joint leakage after installation

Ensure pipe and fitting were clean before cementing, sufficient solvent cement was applied, and the joint was properly twisted and held for the initial setting period. Check for cracks in the fitting or pipe.

Difficulty pushing pipe fully into fitting

Check for obstructions or damage inside the fitting socket. Ensure pipe is cut square and deburred. Lightly sand the pipe end if necessary.

Solvent cement not adhering properly

Ensure surfaces are clean and dry. Use the correct type of solvent cement (SC250 recommended for ABS). Avoid applying in excessively cold temperatures.

Pros and Cons

Pros

  • Creates efficient flow direction at an obtuse angle.
  • Permanent and secure solvent weld joint for leak prevention.
  • Made from durable and long-lasting ABS material.
  • Complies with BS EN 1455 and is Kitemarked for quality assurance.
  • Available in multiple sizes for flexibility in installation.

Cons

  • Solvent weld joints are permanent and cannot be demounted.
  • Requires specific solvent cement and ventilation for safe application.
  • Installation requires precise alignment as joints cannot be easily adjusted.
  • Not suitable for systems requiring frequent disassembly or modification.

Setup, Compatibility & Care

Setup:

  1. Preparation: Ensure the outer surface of the pipe and the inner surface of the fitting are clean, dry, and free from dust, grit, or swarf.
  2. Application: Apply a thin, even layer of SC250 solvent cement to both surfaces.
  3. Assembly: Push the pipe fully into the fitting. Give it a quarter-turn twist to ensure full contact and proper distribution of the solvent cement.
  4. Setting: Wipe away any excess solvent cement with a damp cloth. Allow the joint to set for at least 5 minutes before moving.
  5. Curing: The installed system should be left undisturbed for a minimum of 12 hours before pressure testing or use to ensure the joint has fully cured.

Compatibility:

  • This fitting is designed for use with solvent weld ABS pipes of the same diameter (50mm).
  • It is suitable for use in domestic wastewater and drainage systems.

Care:

  • No specific ongoing maintenance is required for the bend itself, provided the system is installed correctly.
  • Always ensure adequate ventilation when working with solvent cement.
  • Avoid contact with skin and eyes; wash thoroughly if contact occurs.
  • Keep solvent cement away from heat sources and naked flames.

Price History

DatePrice
Visit shop