Soho Lighting White Metal Flat Plate Dimmer - 3 Gang 2-Way 150W LED

The dimmer supports a maximum of 150W for dimmable LED bulbs across all three gangs.

No, this dimmer requires bulbs specifically designed to be dimmable. Using non-dimmable bulbs will result in improper function, such as flickering or buzzing, and may damage the bulbs or the dimmer.

The mode can be switched by pressing a dedicated button, usually located on the dimmer module itself, often accessible after removing the faceplate. Refer to the product's installation manual for precise instructions.

For 2-way switching (controlling a light from two different locations), you will need to use this intelligent dimmer in conjunction with standard 2-way switches at the other location(s). Basic wiring for a 2-way circuit is necessary.

The main faceplate is made of white metal, providing a premium look. However, the dimmer cap itself is made of plastic.

Please refer to the product packaging or the manufacturer's website for specific warranty information, as warranty periods can vary.

Installation requires basic electrical knowledge and should be performed with the power turned off. If you are not comfortable with electrical wiring, it is recommended to hire a qualified electrician.

Ensure the circuit breaker is on and the wiring is correctly connected according to the installation guide. Verify that the bulb is functional and compatible.

Check that compatible dimmable bulbs are installed. Try switching the dimmer mode (leading/trailing edge) to see if performance improves. Ensure the total wattage does not exceed the maximum limit for the bulb type.

Some warmth is normal, especially under heavy load. If the dimmer is excessively hot, turn off the power and check the total bulb wattage. Ensure there are no short circuits and that the ventilation around the unit is adequate.

Verify the wiring for that specific gang. Ensure the bulb connected to it is dimmable and within the specified wattage limits. Try swapping the bulb with a known working one.

Confirm that standard 2-way switches are used and wired correctly in conjunction with the dimmer. Check all connections between the dimmer and the accompanying switches.