Best current price£48.04from The Range
Shopping.co.uk recommended and popular offers
The Range£48.04Visit shop Unifix Ce Marked Assembled Iso 4017 8.8 Galvanised Set/Nut/Washer - M16 X 100. (Box Of 50) - White
Visit shop9 offers from £48.04 - £97.49
View price history by clicking the chart icon.
This Unifix M16 x 100 ISO 4017 8.8 Galvanized Set/Nut/Washer is designed for construction and DIY projects requiring high tensile strength and corrosion resistance. Its key benefit is the pre-assembled nature, offering quick and reliable fastening. A potential consideration is its specific use for high-tensile applications, meaning it may be over-engineered for lighter tasks.
| Colour | Silver |
|---|---|
| Model Part Number | ISO 4017 8.8 |
| Brand | Unifix |
ISO 4017 specifies the dimensions and mechanical properties for metric screws with hexagon heads. The '8.8' refers to the tensile strength class, indicating a high-strength fastener suitable for demanding applications.
Yes, the 8.8 tensile strength class indicates it is designed for high-strength applications, making it suitable for structural connections where appropriate engineering calculations are followed.
The galvanized finish provides good corrosion resistance for general use and moderate environmental exposure. For extremely harsh or marine environments, additional protective measures may be considered.
Yes, the galvanized finish makes it well-suited for outdoor projects as it offers protection against rust and corrosion caused by moisture and weather.
You will need an appropriate size spanner or socket wrench for the M16 nut. A corresponding wrench or bit may be needed for the bolt head if it is not intended to be held stationary.
Yes, this product is a 'Set/Nut/Washer', meaning it comes pre-assembled with the bolt, nut, and a washer.
Ensure the threads are clean and free from debris. Check that you are using the correct M16 nut and that the bolt threads are not damaged. Verify that the nut is aligned straight with the bolt.
Ensure you are using the correct size wrench for the M16 nut. Check that the bolt is fully inserted and that the materials are properly aligned.
While galvanized, prolonged exposure to extreme corrosive environments can affect the coating. Clean the affected area and consider applying a protective coating if the fastener is critical.
Setup: This product is pre-assembled, meaning the bolt, nut, and washer are already together. To use, simply insert the bolt through the materials to be joined and tighten the nut with an appropriate wrench. Ensure the correct size wrench is used for the M16 nut to avoid stripping.
Compatibility: The Unifix M16 x 100 ISO 4017 8.8 fastener is designed to work with M16 nuts and washers adhering to ISO standards. It is compatible with materials that can accommodate a 16mm diameter bolt and a 100mm length.
Care: While the galvanized finish offers corrosion resistance, periodic inspection is recommended, especially in harsh environments. For extended longevity, avoid prolonged contact with highly acidic or alkaline substances. Clean with a dry cloth if dust or debris accumulates.
