Best current price£8.62from eBay
Shopping.co.uk recommended and popular offers
eBay£8.62Visit shop Simoniz Grey Plastic Primer Car Paint Spray Smooth Anti Rust Aerosol 500ml
Visit shop
B&Q£9.49Visit shop B&Q - Grey Plastic Primer Car Smooth Anti Rust 500Ml
Visit shop11 offers from £8.62 - £54.32
View price history by clicking the chart icon.
This guide is for anyone looking to achieve a professional finish on plastic surfaces using Simoniz Grey Plastic Primer Spray. It simplifies the priming process, creating a smooth base for your topcoat and enhancing paint adhesion. However, ensure proper ventilation and follow safety guidelines during application for optimal results.
| Model Part Number | SIMP08D |
|---|---|
| Brand | Simoniz |
This primer is suitable for all plastic surfaces, including fibreglass and polystyrene.
Clean the surface thoroughly to remove dirt, grease, and any loose paint. Lightly sand the surface if needed.
Apply thin, even coats. Multiple coats may be necessary for complete coverage, allowing each coat to dry before the next.
It provides a matt finish.
This primer is specifically designed for plastic surfaces; using it on metal may not provide optimal results.
Refer to the product label for the recommended drying time before applying the topcoat.
Store the can in a cool, dry place away from direct sunlight and heat sources. Ensure the lid is securely closed.
Ensure the surface is thoroughly cleaned and degreased before application. Lightly sand the surface if necessary to improve adhesion.
Invert the can and spray for a few seconds after each use. If clogged, clean the nozzle with a solvent suitable for the paint type.
Apply the primer in thin, even coats. Avoid applying too much paint in one go.
Before use, ensure the surface is clean and free from dirt, grease, and old paint. Shake the can well for at least two minutes before use. Hold the can approximately 20-30 cm from the surface and apply in thin, even coats. Allow each coat to dry according to the manufacturer's instructions before applying subsequent coats or the topcoat. For best results, use in a well-ventilated area. After use, invert the can and spray until only propellant comes out to prevent clogging. Compatibility extends to most plastic materials including fibreglass and polystyrene. Always test in an inconspicuous area first to ensure compatibility and desired finish.
