Shopping.co.uk

Speedfit Straight Push-Fit Service Valve - 15mm X ½"

Speedfit Straight Push-Fit Service Valve - 15mm X ½"

The JG Speedfit Tool-Free Service Valve offers a fast and simple solution for installing appliance...

Best current price£7.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceTrending
eBay£7.99Visit shop

Speedfit 15mm X 1/2″ Tool-Free Isolation Tap Connector Straight 15SVSTC-01-w 700

Visit shop

All Offers

5 offers from £7.99 - £20.00

View price history by clicking the chart icon.

eBaySpeedfit 15mm X 1/2″ Tool-Free Isolation Tap Connector Straight 15SVSTC-01-w 700
£3.50 delivery
£7.99
Visit shop
B&QB&Q - Straight Push-Fit Service Valve15mm X ½"
Free delivery in 1–3 days
£16.92
Visit shop

Product Information

Full details

The JG Speedfit Tool-Free Service Valve is designed for DIY enthusiasts and professional plumbers seeking a quick and reliable way to install or service appliances and fixtures. Its primary benefit is the tool-free, push-fit connection system, significantly reducing installation time and effort, especially in tight spaces. A key consideration is its suitability for hot and cold water systems only; it is not intended for central heating systems.

All features

BrandSpeedfit

Extended Product Information

FAQs

Can this valve be used on central heating systems?

No, this Speedfit service valve is designed for hot and cold water systems only and is not suitable for central heating applications.

Do I need any special tools to install this valve?

No, the valve features a tool-free push-fit connection. Installation is done by hand, and no additional tools like wrenches or soldering equipment are required.

What types of pipes are compatible with this valve?

It is compatible with copper pipe, and with Speedfit PEX and polybutylene plastic pipes when used with the appropriate Speedfit inserts.

How do I remove the valve if I need to disconnect it?

To demount, pull the blue collet towards the body of the fitting and then pull the pipe to release it from the valve.

What is the purpose of the integrated handle?

The integrated 1/4 turn handle allows you to easily shut off the water supply to the connected appliance or fixture for maintenance or in case of emergencies.

Is this valve suitable for outdoor use?

While designed for water systems, it is primarily intended for indoor plumbing applications. Long-term outdoor exposure to UV and extreme temperatures may affect its performance and lifespan.

Troubleshooting

Valve does not seal properly or leaks.

Ensure the pipe is pushed fully into the fitting. Check the pipe end for any damage or debris. Verify that the correct type of pipe is being used and that any necessary inserts are in place.

Difficulty pushing the pipe into the valve.

Ensure the pipe end is cut square and is free from burrs. If using plastic pipe, confirm that the correct Speedfit insert is used and properly seated.

Handle is stiff or difficult to turn.

Operate the valve several times to free it up. Ensure there are no external obstructions. If the issue persists, the valve may need replacement.

Pros and Cons

Pros

  • Extremely fast and easy installation process.
  • No need for tools, hot works, glue, or flux, improving safety.
  • Ideal for working in tight or awkward spaces.
  • Secure and reliable connection thanks to Grip & Seal technology.
  • Simple operation with the integrated 1/4 turn shut-off valve.

Cons

  • Not suitable for central heating systems.
  • Requires specific Speedfit inserts for PEX and polybutylene pipe.
  • Initial cost may be higher than traditional compression fittings.

Setup, Compatibility & Care

Setup:

  1. Ensure the pipe end is clean, dry, and free from burrs.
  2. Push the Speedfit valve fully onto the pipe until it is securely seated.
  3. Connect the appliance hose or fitting to the threaded end of the valve, tightening by hand.

Compatibility:

  • Pipe Types: Compatible with copper pipe, Speedfit PEX pipe, and polybutylene plastic pipe (requires appropriate Speedfit inserts for plastic pipes).
  • Systems: Suitable for use on cold and hot water services.
  • Exclusions: Not suitable for central heating systems.

Care:

  • Regularly check connections for any signs of leaks. Tighten by hand if necessary.
  • Keep the valve handle free from obstruction.
  • No special cleaning agents are required. Wipe with a damp cloth if necessary. Avoid abrasive cleaners.

Price History

DatePrice
Visit shop