Best current price£18.83from B&Q
Shopping.co.uk recommended and popular offers
B&Q£18.83Visit shop B&Q - Edge Forming BitH 1/4R1 6.3mmD 25.4mmL 14mmG 46mm
Visit shop1 offer from £18.83
View price history by clicking the chart icon.
This Bosch Standard for Wood Surface Profiling Bit is designed for woodworkers seeking precise veining and fluting on solid wood and wood composites. Its key benefit is the high cutting performance and durability provided by its tungsten carbide cutter, which also helps prevent kickbacks. A minor consideration is its specific application focus, making it best suited for detailed profiling tasks rather than large-scale material removal.
| Model Part Number | 2608628424 |
|---|---|
| Brand | Bosch |
This bit is designed for creating decorative veining, fluting, and general profiling on wood surfaces, adding detail to panels and edges.
It is suitable for use on soft wood, hard solid wood, and various wood composites.
The design of the cutting edges limits the thickness of the chips produced, which helps to reduce the force exerted on the router and operator, thereby preventing kickbacks.
Yes, the Standard for Wood Surface Profiling Bit is compatible with CNC machines.
Clean the bit after each use with a brush or solvent to remove debris. Store it in a dry, protected environment to prevent rust and damage.
The shank diameter is 1/4 inch (H 1/4in).
The cutting diameter (D) is 25.4mm, the radius (R1) is 6.3mm, and the cutting height (L) is 14mm.
Ensure the bit is sharp and free of debris. Check that the router speed is appropriate for the material and bit size. Verify the feed rate is consistent and not too fast.
Check that the bit is securely tightened in the collet and that the router itself is in good working order. Ensure the material is properly secured and not vibrating.
Reduce the depth of cut per pass. Ensure you are feeding the wood into the bit in the correct direction, against the rotation. Verify the chip thickness limitation is functioning correctly.
Reduce the feed rate or the depth of cut. Ensure adequate dust extraction is in place to prevent buildup around the cutting area.
Setup: Ensure the bit is securely clamped in your router's collet. Set the appropriate cutting depth for your material and desired effect. Always follow the manufacturer's safety guidelines for your specific router.
Compatibility: This bit is compatible with standard 1/4-inch shank collets found on most handheld routers, table-mounted routers, and CNC machines. It is intended for use with soft and hard solid wood, and wood composites.
Care: After each use, clean the bit to remove wood dust and resin buildup. A stiff brush or a solvent like mineral spirits can be used. Store the bit in a dry place, preferably in its original packaging or a protective case, to prevent damage and corrosion. Inspect the tungsten carbide tips for any signs of chipping or wear before each use.
