CarPlan Car Wash Snow Foam - Demon Foam Pre Wash 5L x4

Use 50ml of Demon Foam per bucket of clean, warm water for the wash solution.

Yes, the Demon Foam is specifically formulated to be suitable for all exterior surfaces and paintwork finishes.

Yes, it is recommended to rinse off loose dirt with cold water first to prepare the surface for the foam treatment.

The product information specifies dilution in a bucket. For foam lance use, a separate, dedicated foam lance product and instructions may be required. Always follow manufacturer guidelines for specific application tools.

Pre-wash foam helps to lift and encapsulate dirt and contaminants from the surface, making subsequent washing easier and reducing the risk of scratching the paintwork.

It can be used regularly as part of your car care routine to maintain a clean and shiny finish.

Demon Foam is designed as a pre-wash treatment to create a dense foam that clings and lifts dirt before the main wash, whereas regular car shampoos are typically mixed directly with water for the main washing stage.

Ensure the correct dilution ratio (50ml per bucket) is used. Verify that warm water is being used for mixing, as cold water may affect foaming performance.

Make sure all loose dirt was rinsed off before application. Ensure the vehicle is thoroughly rinsed after washing and dried completely with a clean chamois or microfibre cloth.

Allow the foam to dwell for a few minutes on heavily soiled areas before washing. For extremely tough grime, a second application or more intensive washing may be necessary.