Best current price£25.06from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£25.06Visit shop Eaton Industries Eaton Z-S/Wm 16A 230V Modular Changeover Switch - 248345
Visit shop4 offers from £25.06 - £88.92
View price history by clicking the chart icon.
This professional-grade modular changeover switch from EATON INDUSTRIES (MPN: 248345) is designed for 230/400V AC systems, offering reliable I-O-II functionality for electrical circuit management. It is ideal for electricians and system integrators needing robust control and safety features in industrial or commercial settings. A key benefit is its high short-circuit strength, ensuring protection even under fault conditions. However, note that it does not include an integrated signal lamp.
| Model Part Number | 248345 |
|---|---|
| Brand | Eaton |
The switch has a rated operational current of 16A and a nominal current of 20A. It also has a significant short-circuit strength of 10kA (ICW) and a breaking capacity of 20 kA.
This switch is designed for 230/400V AC systems and is not rated for DC circuits. Using it with DC voltage may lead to malfunction or safety hazards.
I-O-II indicates the switch has three positions: 'I' for the primary source, 'O' for off/center position, and 'II' for a secondary source. This allows for selection between two inputs and a neutral/off state.
The IP40/IP41 rating indicates protection against solid objects larger than 1mm (IP40) and protection against vertically falling water drops (IP41), suitable for indoor use in protected environments.
It is designed for mounting on a standard 35mm top-hat rail and fits standard 45mm front panel dimensions with a 17.5mm mounting width (1SU).
No, this model does not include an integrated signal lamp to indicate the switch position.
Warranty information is typically provided by the retailer or EATON INDUSTRIES directly. Please refer to your purchase documentation or the manufacturer's website for specific warranty details.
Ensure no obstructions are preventing movement. Check that wiring terminals are not over-tightened, which can distort the housing. Verify correct mounting on the rail.
Confirm power is present at the input terminals. Check all wiring connections for tightness and correct phasing. Verify the switch is in the correct position (I or II).
Check that the connected load does not exceed the 16A operational current rating. Ensure terminal connections are tight to minimize resistance. Verify adequate ventilation in the enclosure.
Re-seat the switch firmly on the top-hat rail. Check that the rail itself is securely mounted and straight. Ensure any panel mounting screws are properly tightened.
Setup:
Compatibility:
Care:
