Command Outdoor Decorating Clips - Clear, Pack of 20

Use one clip for every 2 feet (0.6 meters) of lights. They can support up to 12 meters of lights, provided the weight is appropriate.

No, these clips are not recommended for use on wallpaper, as they may cause damage upon removal.

Avoid using on wallpaper, brick, textured surfaces, or delicate materials.

Wait one hour after applying the clips to the surface before hanging your decorations to allow the adhesive to set.

The weight capacity depends on the decorations and spacing. Adhere to the spacing guidelines (one clip every 2 feet) and ensure the weight is appropriate for the lights or decorations being hung.

No, the clips are not reusable. Once removed, you will need to replace the adhesive strips with new ones if you wish to reapply them.

Yes, these clips are UV and water-resistant, making them suitable for outdoor use in various weather conditions, including rain and snow, within the specified temperature range.

Ensure the surface is clean and dry. Make sure you're pressing the clip firmly for 30 seconds. If the surface is too cold or too hot, wait for moderate temperatures. Try a new strip if needed.

Check the weight of the decorations to ensure they are within the clip's capacity. Make sure the clips are properly spaced (every 2 feet or 0.6 meters) and that the adhesive has had time to set (at least one hour).

If residue remains, try wiping with rubbing alcohol. Ensure you are stretching the strip slowly and following the removal instructions.

Ensure you're using the clear clips on the appropriate surfaces. If they are still visible, try positioning them in less conspicuous locations.