Best current price£10.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.49Visit shop B&Q - No More Nails 3In1 White Water Resistant Grab Adhesive & Sealant 445GVolume 280Ml
Visit shop3 offers from £10.49 - £18.77
View price history by clicking the chart icon.
1 offer from £14.99
View price history by clicking the chart icon.
The UniBond No More Nails 3in1 Clear is a versatile solution designed for DIY enthusiasts and professionals who need a single product for bonding, filling, and sealing tasks. It is ideal for interior applications where a clean, discreet aesthetic is required, such as kitchen and bathroom projects, though it may not be suitable for heavy-duty structural load-bearing requirements compared to dedicated construction adhesives.
| Brand | UniBond |
|---|
The UniBond 3in1 is primarily designed for interior applications; for exterior projects, look for weather-proof specific alternatives.
While it provides instant grab, full curing typically takes 24 hours depending on the temperature and humidity of the room.
Yes, once the adhesive has fully cured, it can be painted over to match your existing decor.
Yes, it is effective for bonding glass in non-structural interior applications.
It is suitable for kitchen use, but ensure it is used for sealing and bonding rather than direct contact with food.
Ensure the nozzle is cut at a wide enough angle and that your sealant gun is functioning correctly; if the tube is old, check if the material has started to cure near the nozzle tip.
The surfaces may have been dirty, oily, or damp. Ensure all surfaces are thoroughly cleaned and dry before re-applying the product.
This may occur if the layer is too thick or if moisture was trapped during the curing process; apply thinner layers for better clarity.
To set up for use, cut the nozzle to the desired bead size and load the cartridge into a standard 280ml sealant gun. For compatibility, this adhesive works well on most interior porous and non-porous surfaces, such as wood, ceramic, plaster, and glass. After use, ensure the cap or nozzle is sealed correctly to prevent the product from curing inside the tube. Store in a cool, dry place away from direct sunlight to maintain the shelf life of the adhesive. If applying in a high-traffic area, allow the adhesive to fully cure for 24 hours before subjecting it to significant movement or contact with water.
