Best current price£19.58from B&Q
Shopping.co.uk recommended and popular offers
B&Q£19.58Visit shop B&Q - Tct Circular Saw Blade184mm X 16mm X 40 TeethFor HardwoodSoftwoodPlywoodMdf Board
Visit shop1 offer from £19.58
View price history by clicking the chart icon.
This Toolpak 184mm circular saw blade with 40 teeth is designed for professional construction and trade use. Its key benefit is providing a sharp, durable cut on a variety of wood materials thanks to its high-grade tungsten carbide teeth and hardened steel body. A potential caveat is its suitability primarily for hand-held circular saws, not for other machinery without modification. Key features include a hardened and tempered steel body for stability, premium 'micro-grain' tungsten carbide teeth for longevity, and key-hole expansion slots to reduce noise, vibration, and heat.
| Model Part Number | 40 |
|---|---|
| Brand | Toolpak |
This blade is suitable for cutting hardwood, softwood, plywood, particle board, and MDF.
The Toolpak circular saw blade has a maximum speed rating of 8,300 RPM.
The blade has a 184mm diameter and a 16mm arbor (bore) size. Ensure your hand-held circular saw matches these specifications.
These slots help to reduce noise and vibration during operation, and they also assist with heat dissipation, preventing the blade from distorting.
Blade replacement depends on usage and material. Inspect for dullness, chipping, or damage. When cuts become rough or difficult, it's time for a new blade.
No, this blade is specifically designed for cutting wood and wood-based materials. Using it on other materials can be dangerous and damage the blade.
Use a soft brush or cloth to remove sawdust and resin. Avoid using abrasive cleaners or harsh chemicals that could damage the carbide teeth or steel body.
Ensure the blade is securely tightened on the arbor. Check for any damage or warping on the blade itself. Verify that the saw's arbor is clean and free of debris. Ensure you are using the correct blade for the material.
The blade may be dull or damaged. Inspect the carbide teeth for chipping or wear and replace if necessary. Ensure the feed rate is appropriate for the material being cut. Check that the blade is installed in the correct rotation direction.
Reduce the feed rate to allow the blade to cut efficiently without excessive friction. Ensure the key-hole expansion slots are clear of debris. Verify that the blade is not being forced through the material. Check for proper saw motor ventilation.
Confirm the blade is appropriate for the material type (hardwood, softwood, MDF, etc.). The blade may be dull and require replacement. Ensure the saw is operating at the correct speed and power.
Compatibility: This 184mm diameter blade is designed for use with standard hand-held circular saws that have a 16mm arbor (bore) size. Always ensure your saw's arbor matches the blade's specification before installation. The blade's maximum RPM rating is 8,300.
Setup:
Care:
