D-C-Fix Self-Adhesive Vinyl Film - Flagstaff Oak - 67.5cm x 3M

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£19.97from B&Q

All Offers

2 offers from £19.97 - £22.99

View price history by clicking the chart icon.

B&QB&Q - Flagstaff Oak 67.5Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£19.97
Visit shop
Robert Dyasd-c-fix Flagstaff Oak Vinyl Wrap - 67.5cm x 3m - Brown
£2.95 delivery
£22.99
Visit shop

Product Information

Full details

This D-C-Fix self-adhesive vinyl film in Flagstaff Oak is perfect for homeowners and renters looking to refresh kitchen worktops, furniture, and other flat surfaces affordably and without permanent changes. Its key benefit is the ease of application and repositionability, allowing for DIY-friendly makeovers. A key consideration is its heat resistance limit of 70°C, meaning hot pans require a worktop saver.

All features

Model Part Number200-8343-3
Brandd-c-fix

Extended Product Information

FAQs

Can I apply this vinyl to a textured surface?

For best adhesion, the surface should be smooth. While it may adhere to slightly textured surfaces, performance and longevity might be reduced. Thorough cleaning is essential.

How do I clean the vinyl film?

Simply wipe the surface with a damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive scrubbers.

Is this product suitable for outdoor use?

This product is designed for interior use. Prolonged exposure to direct sunlight and weather conditions may affect its appearance and durability.

What is the best way to ensure a bubble-free finish?

Apply the film slowly and gradually peel back the backing paper. Use a felt edge smoother or a credit card wrapped in cloth to push out air bubbles as you apply the vinyl.

Can I layer multiple pieces of this vinyl?

Yes, you can overlap seams if necessary, but try to minimize overlaps for a smoother finish. Ensure any overlaps are well-sealed if they are in high-moisture areas.

What are the dimensions of the product?

The product is 67.5cm wide and is supplied in a 3-meter length (H:300 x W:67.5 x D:0 cm indicates the dimensions of the roll.

Is the adhesive safe for my existing surfaces?

The water-based adhesive is designed to be removable. However, on very delicate or old surfaces, testing on an inconspicuous area first is always recommended.

Troubleshooting

Air bubbles or creases appear during application.

Gently peel back the affected section of the film and reapply, using a felt edge smoother to push out air. For stubborn bubbles, a pinprick can release trapped air.

The film is not sticking properly.

Ensure the surface is completely clean, dry, and smooth. Reapply heat with a hairdryer on a low setting to activate the adhesive, then press firmly.

Difficulty applying to curved edges.

Use a hairdryer on a low setting to warm and soften the vinyl, making it more pliable and easier to stretch and mold around curves.

Water is lifting the edges around a sink or hob.

Remove the vinyl from the affected edge, clean the area, and reapply. Crucially, apply a silicone sealant around the sink/hob edge after the vinyl is installed to create a waterproof barrier.

The film is difficult to remove.

Gently heat the vinyl with a hairdryer on a low setting. This softens the adhesive, making it easier to peel away slowly and smoothly.

Pros and Cons

Pros

  • Budget-friendly alternative to replacing surfaces.
  • DIY-friendly application with repositionable adhesive.
  • Enhances aesthetics with realistic woodgrain design.
  • Suitable for renters due to its removable nature.
  • Easy to maintain with a simple wipe-clean surface.
  • High ratings for adhesion, lightfastness, shrinkage, and durability.

Cons

  • Heat resistance is limited to 70°C; hot pans can cause damage.
  • Requires sealing around sinks and hobs to prevent water ingress.
  • Not a factory-sealed retail roll, but repackaged custom lengths.
  • Requires specific tools (felt smoother, utility cutter) for best results.
  • May stain if spills are not wiped up promptly.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and smooth. Dust and grease will affect adhesion.
  2. Measure and cut the vinyl film using the grid on the reverse for accuracy.
  3. Peel back a small section of the backing paper.
  4. Apply the film to the surface, using a felt edge smoother to push out air bubbles and creases as you go.
  5. Reposition the film as needed by gently peeling it back.
  6. Use a utility cutter for any excess material or trimming.
  7. For curved edges, use a hairdryer on a low setting to make the vinyl pliable, then carefully mold it into shape.
  8. Seal around the edges of sinks and hobs with a silicone sealant to prevent water damage.

Compatibility:

  • Suitable for any flat, smooth surface including worktops, tabletops, cabinets, furniture, and walls.
  • Not recommended for direct contact with hot pans (use worktop savers).

Care:

  • Wipe clean with a damp cloth. Address spills immediately to prevent staining.
  • Avoid abrasive cleaners or tools that could scratch the surface.
  • The vinyl is heat resistant up to 70°C.

Price History

DatePrice
Visit shop