Rust-Oleum Bathroom Wall & Ceiling Paint - Dijon - Yellow
Best current price£33.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£33.99Visit shop B&Q - Dijon Matt Bathroom Wall & Ceiling Paint 2.5L
Visit shopB&Q£33.99Visit shop One Offer
1 offer from £33.99
View price history by clicking the chart icon.
Product Information
Full details
This guide helps you get the most out of Rust-Oleum Bathroom Wall & Ceiling Paint in Dijon Yellow. Ideal for bathrooms, it provides a water-resistant, matt finish. A key benefit is its resistance to cracking and peeling for up to 6 years. However, it is not suitable for areas in constant contact with water, like inside shower enclosures.
All features
| Colour | Yellow |
|---|---|
| Brand | Rust-Oleum |
Extended Product Information
FAQs
How much area does a 2.5L tin cover?
A 2.5L tin covers approximately 30m² when applied in a single coat, but requires two coats for optimal results. Therefore, the actual coverage is around 15m².
Can I use this paint in a shower enclosure?
No, this paint is water-resistant, but it is not suitable for areas in constant contact with water, such as inside shower enclosures. For those areas, you should use a product specifically designed for that purpose.
How do I clean the painted surface?
You can clean the painted surface with a damp cloth and mild soap. Avoid using abrasive cleaners.
What is the drying time between coats?
Please refer to the manufacturer's instructions on the tin for the recommended drying time between coats. Typically, it takes several hours, but it may vary depending on environmental conditions.
Is a primer needed before applying the paint?
On previously painted surfaces, a primer is generally not required, unless the original surface is glossy or has poor adhesion. For bare plaster, brick, or concrete, a primer may be beneficial, though this paint can be applied directly.
How long will the paint last?
When applied according to the label instructions, Rust-Oleum Bathroom Wall & Ceiling Paint resists cracking, peeling, and blistering for up to 6 years before first maintenance.
Where can I purchase a tester sachet?
Tester sachets (10ml) are available from various retailers, allowing you to accurately assess the colour and adhesion before painting a large area. Check local hardware stores or online retailers for availability.
Troubleshooting
Paint is not adhering to the surface.
Ensure the surface is properly prepared, clean, and free from any contaminants. Lightly sand glossy surfaces to improve adhesion. Apply a primer if necessary.
Paint is peeling or cracking.
Ensure the surface is completely dry before applying the paint. Apply thin, even coats, and avoid over-application. Check for any moisture issues causing the paint to fail.
Colour is not as expected.
Use a tester sachet to confirm the colour and adhesion before painting the entire area. Make sure to apply the recommended number of coats.
Paint has a strong odour.
Ensure adequate ventilation during and after painting. The water-based formula has low odour, but ventilation is still important.
Pros and Cons
Pros
- Water-resistant formula ideal for bathrooms.
- Available in a wide range of colours.
- Easy to apply with a brush or roller.
- Durable and long-lasting finish (up to 6 years before first maintenance).
- Low odour for a more pleasant application experience.
Cons
- Not suitable for areas in constant contact with water (e.g., inside shower enclosures).
- Requires two coats for optimal results.
- Performance may vary depending on surface preparation.
- Requires proper surface preparation for best results.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, and grease. Wash the surface with a suitable cleaning agent and allow it to dry completely.
- Application: Stir the paint thoroughly before use. Apply the first coat using a brush or roller. Allow the first coat to dry completely (as per the manufacturer's instructions) before applying the second coat.
- Drying Time: Allow each coat to dry according to the manufacturer's instructions. This usually takes several hours.
- Cleaning: Clean up spills immediately with water. For cleaning the finished surface, use a damp cloth and mild soap.
- Compatibility: This paint is compatible with bare plaster, brick, concrete, and previously painted surfaces. However, always test on a small, inconspicuous area first to ensure compatibility and adhesion.
- Storage: Store the paint in a cool, dry place, away from direct sunlight and extreme temperatures. Reseal the tin tightly after use to prevent drying.