Best current price£11.35from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.35Visit shop B&Q - Sds-Plus Tile Removing ChiselCompatible With Bosch Makita For CeramicsMasonryBrickConcreteFloor TilesGranite
Visit shop1 offer from £11.35
View price history by clicking the chart icon.
The Dapetz 80mm SDS-Plus Tile Removing Chisel is an essential tool for contractors and DIY enthusiasts who need to strip tiles, plaster, or mortar from masonry surfaces efficiently. Its primary benefit is the wide 80mm head, which allows for significantly faster material removal compared to standard pointed chisels, though users should note that the cranked design requires a specific angle of attack to avoid damaging the underlying substrate.
| Model Part Number | DP11949 |
|---|---|
| Brand | Dapetz |
No, this tool requires an SDS-Plus rotary hammer. It will not fit into a standard three-jaw drill chuck.
The chisel is designed for masonry and concrete. Exercise caution on hollow walls or thin drywall as the impact force can cause structural damage.
Use a bench grinder to restore the edge, making sure to keep the metal cool with water during the process to avoid losing the heat-treated temper.
It is designed primarily for tile, plaster, and masonry. It is not recommended for wood flooring as the steel edge may splinter the wood.
The crank allows the hammer to sit at a comfortable angle while the blade stays flush against the floor, providing better leverage for lifting.
Ensure the SDS-Plus shank is fully inserted until it clicks, and check if the locking mechanism on the rotary hammer is obstructed by debris.
Verify that your rotary hammer is locked in 'Chisel' or 'Hammer Only' mode; if set to 'Hammer Drill', the rotation will cause the tool to bounce.
The edge may have become dull; check the blade for nicks or blunting and sharpen the tip using a metal grinder.
To install, ensure your rotary hammer is set to 'Hammer Only' mode to prevent the bit from rotating while in use. The chisel is compatible with most SDS-Plus systems, including models like the Bosch GBH series (2-20, 2-26, 3-28, 2-28) and Makita HR series (HR2470, HR2630, HR2811FT, HR4011C). For maintenance, keep the shank lightly greased with hammer grease to prevent premature wear in the tool chuck. When the edge dulls, use a bench grinder to re-hone the angle, ensuring you do not overheat the steel to maintain its tempered hardness.
Dapetz SDS+ Wide Chisel - 75mm x 250mmFrom £8
SDS Plus Bolster Chisel Tile Brick Block Remover Removal - 80mm - Cranked - AB ToolsFrom £12
80mm SDS Cranked Tile Masonry Removing Chisel - ToolzoneFrom £8
DeWalt Tile Scaling Chisel - SDS Plus - 40mmFrom £18
Clay Breaker Spade Bit - Impact Chisel - Loops 110 x 500mmFrom £13
DeWalt Spade Chisel - SDS Plus - 40mmFrom £14
Erbauer Sds Plus Flat Chisel - L250mm W40mmFrom £9
Bulldog Shovel - GreenFrom £19
Roughneck Trowel & Square Small Tool - 12mmFrom £10
Bulldog Cable Laying Shovel - GreenFrom £12
Draper Carpet Laying Tool - 75mmFrom £10
Kent & Stowe Stainless Steel Capability Digging Spade - K/S70100004From £34