Oil Pressure Sensor - Febi Bilstein - 101023

This switch is designed for compatibility with specific vehicle models, including Iveco and Irisbus. However, it is essential to verify fitment with your exact vehicle before purchase, as compatibility is not guaranteed for all applications.

The oil pressure switch operates at a shifting point of 0.45 bar. This means it will trigger a signal when the oil pressure drops below this level.

Yes, the Febi Bilstein Oil Pressure Switch (101023) includes a seal ring for installation.

The switch has a length of 54 mm, an external thread size of M14 x 1.5, and requires a 21 mm spanner for installation.

Installation should ideally be performed by a competent individual or qualified mechanic experienced with automotive systems. The product is typically supplied without fitting instructions.

Your vehicle's oil pressure warning light will typically illuminate on the dashboard if the pressure drops below the safe threshold detected by the switch. Check your owner's manual for specific dashboard indicator meanings.

The part number for this Febi Bilstein oil pressure switch is 101023.

Double-check the electrical connection to the switch. Verify that the switch is correctly tightened and the seal is properly seated. Confirm that the oil pressure in the system is actually within the normal operating range; if not, the issue may lie with the oil pump, oil level, or an internal engine problem.

Ensure the seal ring is present and correctly positioned. Tighten the switch to the recommended torque specification (consult a service manual). If the leak persists, the switch may be faulty or the mating surface on the engine block may be damaged.

Verify the electrical circuit, including the wiring and the dashboard warning light itself. Test the switch's functionality by manually grounding its terminal (if applicable and safe to do so) to see if the light illuminates. If the circuit is sound, the switch itself may be defective.