12V Cordless Polisher - Body Only - 71mm Pad Size

The body-only package includes the polisher itself, a side handle, two foam pads, and one wool polishing pad. The 12V battery and charger are sold separately.

This polisher uses a 12V Lithium-ion battery. A 1.5Ah capacity is recommended for optimal performance.

The polisher is designed with a 71mm pad size. While adapters might exist, it's recommended to use pads designed for this size for optimal performance and to avoid strain on the tool.

Battery life depends heavily on the speed setting, pressure applied, and the type of task. For light polishing, a 1.5Ah battery could last approximately 20-30 minutes, but it's advisable to have a spare charged battery on hand.

While capable of light to medium correction, its 12V system and 71mm pad size may not be ideal for extensive, heavy-duty paint correction tasks that often require more power and larger pads found in higher-voltage tools.

Please refer to the product packaging or the Loops official website for specific warranty information, as it can vary by region and retailer.

Ensure the battery is fully charged and properly inserted into the tool. Check that the battery contacts are clean and free of debris. Verify the power switch is in the 'on' position.

The battery may be low on charge; try a fully charged battery. Check the polishing pad for excessive buildup or damage, which can cause drag. Ensure there are no obstructions in the tool's air vents.

Ensure the polishing pad is securely attached and balanced. Check for any damage to the pad or backing plate. If vibration persists, inspect the tool for internal issues.

Ensure the battery is correctly seated. If the issue persists with multiple charged batteries, there may be a fault with the indicator light or the tool's electronics.