MOTIP Hammerfinish Spray - Green - 400ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to apply a durable, textured finish to various surfaces using MOTIP Hammerfinish Spray in Green. This spray paint offers excellent coverage and resistance to scratches, chemicals, and weather, making it ideal for both body and hardware projects. However, it's crucial to ensure proper surface preparation for optimal results.
Extended Product Information
FAQs
What surfaces can I use this spray on?
MOTIP Hammerfinish Spray is suitable for wood, metal, aluminum, glass, and plastics.
How long does it take for the paint to dry?
Drying time depends on environmental conditions, but it generally dries quickly between coats. Refer to the can for specific drying times.
Do I need to prime the surface before applying the spray?
It's recommended to prepare the surface by cleaning and sanding it. Priming depends on the surface. For example, using a primer on bare metal is recommended.
Is this paint resistant to gasoline?
Yes, MOTIP Hammerfinish Spray is petrol resistant.
How much area can one can cover?
Coverage varies based on the surface and the thickness of the coats. One 400ml can provides good coverage for the average projects.
Can I use this spray on plastic?
Yes, it is suitable for use on most plastics, but always test on a small area first to ensure compatibility.
How should I store the spray can?
Store the spray can in a cool, dry place away from direct sunlight and heat. Make sure the cap is securely in place.
How do I clean up after using the spray?
Clean up any spills or overspray immediately with a suitable solvent, such as paint thinner or acetone. Dispose of used containers properly.
Troubleshooting
Uneven finish or drips
Ensure you are spraying in even coats, and hold the can at the correct distance from the surface. Avoid spraying too much paint in one area.
Paint not adhering properly
Make sure the surface is clean, dry, and free of any contaminants. Lightly sand smooth surfaces for better adhesion.
Hammered effect not visible
Ensure you are applying the paint in the recommended temperature and humidity conditions. Apply the paint in thin layers.
Pros and Cons
Pros
- Durable and long-lasting finish
- Suitable for a wide range of materials
- Provides a unique textured appearance
- Resistant to common environmental factors
- Easy to apply with aerosol spray
Cons
- Requires proper surface preparation for best results
- Coverage area may vary depending on the surface and application
- Color may vary slightly from the appearance on screen
- May require multiple coats for desired finish
Setup, Compatibility & Care
- Surface Preparation: Clean the surface thoroughly. Remove any rust, old paint, grease, or dirt.
- Application: Shake the can well before use. Hold the can approximately 25-30 cm from the surface and spray in even, thin coats.
- Drying Time: Allow the paint to dry completely between coats. Drying time may vary depending on environmental conditions (temperature and humidity).
- Compatibility: This spray is compatible with most common surfaces like wood, metal, aluminium, glass, and plastics. Test on a small, inconspicuous area first to ensure compatibility.
- Care: Clean the painted surface with a soft cloth and mild soap. Avoid abrasive cleaners.