Setup, Compatibility & Care
Compatibility:
These filters are specifically designed for Saeco coffee machines featuring the AquaClean water filter system. Please verify your machine model is compatible before purchase.
Setup Instructions:
- Preparation: Ensure your coffee machine is turned off and unplugged.
- Remove Old Filter: If applicable, remove the existing water filter from the water tank.
- Prepare New Filter: Take a new Spares2go filter. Some manufacturers recommend rinsing the new filter under cold running water for a minute, or immersing it in water until air bubbles stop. Check the illustrated instructions provided with the filter for any specific preparation steps.
- Install New Filter: Securely attach the new filter to the designated connection point within the water tank, ensuring the O-ring seal is properly seated.
- Fill Tank: Fill the water tank with fresh, cold water.
- Priming: Place a container under the hot water spout and run about 2-3 cups of hot water through the machine to prime the new filter. Refer to your Saeco machine's manual for specific priming instructions.
- Reset Filter Indicator: Follow your machine's instructions to reset the water filter indicator.
- Power On: Plug in and turn on your coffee machine.
Care:
These filters are for single use and cannot be cleaned or reused. Once they have reached the end of their effective lifespan (typically 2-3 months or when indicated by the machine), they must be replaced. Store unused filters in a cool, dry place away from direct sunlight.