Setup, Compatibility & Care
Mixing Instructions:
This product is a concentrate and must be diluted with demineralised or distilled water before use. The recommended dilution ratio is typically 50% antifreeze concentrate and 50% water for optimal all-year-round protection. Always consult your vehicle's manual for the specific recommended dilution and capacity.
Compatibility Check:
Before use, verify that Granville Zerocol 40 meets the specifications required by your vehicle manufacturer. Key standards include: AFNOR NF R15-601, ASTM D3306 & D6210, BS 6580:2010, Cummins CES 14603, Glycantin G40 & GG40, MAN 324 Type Si-OAT, MTU MTL 5048, SAE J1034, Scania TB 145, and VW TL 774 J (G13). It can be used where G40 or GG40 are recommended.
Cooling System Care:
- Drain and Flush: Completely drain the old coolant and flush the cooling system with clean water or a suitable flushing agent to remove any residues.
- Fill: Fill the system with the pre-mixed coolant solution.
- Bleed: Run the engine with the heater on and the bleed screws open (if applicable) to remove air pockets. Top up as necessary after the engine has cooled.
- Regular Checks: Periodically check the coolant level in the expansion tank when the engine is cold.
Storage:
Store in original, tightly closed containers in a cool, dry, well-ventilated area away from direct sunlight and sources of ignition. Keep out of reach of children and pets.