Best current price£10.99from eBay
Shopping.co.uk recommended and popular offers
eBay£10.99Visit shop Tamiya Spray Paint TS-31 Bright Orange 100ml Model Synthetic Lacquer 85031
Visit shop2 offers from £10.99
View price history by clicking the chart icon.
This Tamiya Spray Paint TS-31 in Bright Orange is designed for hobbyists and model builders looking to achieve a smooth, vibrant finish on their projects, particularly plastic models like 1/24 scale car bodies. Its key benefit is providing excellent coverage and durability with quick drying times, enhancing the aesthetic appeal of larger model surfaces. A minor consideration is that it's a synthetic lacquer, requiring proper ventilation during use.
| Model Part Number | 85031 |
|---|---|
| Brand | Tamiya |
Drying time varies with temperature and humidity, but typically, it is touch-dry within 10-15 minutes and can be handled or re-coated after about 30 minutes.
While primarily designed for plastic, it may adhere to other surfaces. However, testing on a small, inconspicuous area is recommended. A suitable primer for the material would be beneficial.
For fresh overspray on surfaces other than the model, use a cloth dampened with Tamiya lacquer thinner or an appropriate solvent. Dried overspray may require gentle sanding.
No, Tamiya TS series paints are specifically formulated for spray can application and are not intended to be used with an airbrush.
This depends on the size of the model and the number of coats applied. A 100ml can is generally sufficient for the main body of one large model (e.g., 1/24 scale car) or several smaller models.
Tamiya paints are known for their durability and resistance to fading when properly cured and protected, especially when a clear coat is applied.
Shake the can more vigorously. Ensure the nozzle is not clogged. If clogged, remove and clean as per care instructions.
The spray was likely applied too thickly or too close to the model. Allow to dry fully, then gently sand the affected area and reapply in lighter coats from a greater distance.
The surface may not have been properly cleaned or prepared. Ensure the model is free of dust, grease, and previous finishes. Consider using a primer.
Apply additional thin, even coats. Ensure coats are dry before applying subsequent ones. A primer can also improve opacity.
Setup: Ensure the model surface is clean, dry, and free from dust and grease. A primer, such as Tamiya's primer spray, is recommended for best adhesion and color depth, especially on bare plastic. Shake the can vigorously for at least one minute after the rattling sound begins. Hold the can upright and spray from a distance of 25-30 cm (10-12 inches). Apply in light, even coats, moving the can continuously back and forth.
Compatibility: Tamiya TS-31 Bright Orange is a synthetic lacquer and is compatible with most plastic model kits. It can be safely overcoated with Tamiya acrylic paints (X and XF series) and enamel paints (X-20A thinner is recommended for acrylics, and Tamiya enamel thinner for enamels) once fully dry. Avoid using strong solvents not recommended by Tamiya, as they may damage the paint or plastic.
Care: Store the can in a cool, dry place away from direct sunlight and heat. After use, invert the can and spray for a few seconds to clear the nozzle. If the nozzle becomes blocked, remove it carefully and soak it in lacquer thinner, then clean with a fine wire or pick. Do not spray near open flames or heat sources. Ensure adequate ventilation during use and drying. Keep out of reach of children.
