Shopping.co.uk

Siemens SIMATIC Accessories For Controllers - 6ES7592-1AM00-0XB0

Siemens SIMATIC Accessories For Controllers - 6ES7592-1AM00-0XB0

Siemens front connector for s7-1500 range, 130.5 (h) x 29.8mm (w) - simatic series - 6es7592-1am00...

Best current price£44.87from Rapid Online - Rapid Electronics Ltd.

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Rapid Online - Rapid Electronics Ltd.£44.87Visit shop

Siemens 6ES7592-1AM00-0XB0 SIMATIC PLC connector incl. connectivit...

Visit shop

All Offers

2 offers from £44.87 - £102.53

View price history by clicking the chart icon.

Rapid Online - Rapid Electronics Ltd.Siemens 6ES7592-1AM00-0XB0 SIMATIC PLC connector incl. connectivit...
Free delivery in 1–3 days
£44.87
Visit shop
eBaySIEMENS 6ES7592-1AM00-0XB0 Link
£13.20 delivery
£102.53
Visit shop

Product Information

Full details

This Siemens front connector (6ES7592-1AM00-0XB0) is designed for S7-1500 series PLC systems, enabling users to connect up to 40 cables from sensors and actuators to an I/O interface. Its primary benefit is streamlining connections and simplifying maintenance through its detachable design, allowing module replacement without disconnecting wires. A key consideration is its specific compatibility with the S7-1500 range and its requirement for a standard 35mm wide I/O module.

All features

BrandSiemens

Extended Product Information

FAQs

What is the maximum number of cables this front connector can support?

The Siemens 6ES7592-1AM00-0XB0 front connector can support up to 40 cables from sensors and actuators.

Does this connector come with a connectivity pack?

Yes, the Siemens 6ES7592-1AM00-0XB0 typically includes a connectivity pack for secure wire termination.

Can I use this connector with older Siemens PLC series?

This connector is specifically designed for the Siemens S7-1500 range. Compatibility with other series is not guaranteed and may require verification.

What are the physical dimensions of the connector?

The connector measures 130.5mm in height and 29.8mm in width.

How does the detachable feature benefit me?

The detachable design allows you to remove and replace the I/O module without disconnecting the wires attached to the front connector, saving significant time and effort during maintenance or upgrades.

Is it difficult to install?

Installation is straightforward. It requires aligning and snapping the connector onto a compatible 35mm wide I/O module, followed by wiring the terminals.

What type of wire termination does it use?

It uses screw terminals for secure wire connections, facilitating reliable communication.

Troubleshooting

Device not recognized by PLC

Verify that the connector is securely seated on the I/O module and that all 40 wires are correctly terminated and making good contact.

Intermittent signal loss from connected devices

Check each individual wire connection on the front connector for tightness. Inspect wires for any signs of damage or fraying.

Difficulty in attaching or detaching the connector

Ensure no wires are obstructing the connector's path. Verify that the correct I/O module width (35mm) is being used and that there are no foreign objects in the connection interface.

Error codes related to I/O module communication

Consult the Siemens PLC's diagnostic manual for specific error code meanings. Ensure the firmware of the I/O module is up-to-date and compatible with the connector.

Pros and Cons

Pros

  • Streamlines sensor and actuator connections.
  • Detachable design simplifies maintenance and reduces downtime.
  • Compact form factor fits standard mounting rails.
  • Ensures reliable data transfer for industrial applications.
  • Integrates well with the Siemens SIMATIC ecosystem.

Cons

  • Specific compatibility required with S7-1500 series PLCs.
  • Requires a standard 35mm wide I/O module for mounting.
  • Not a universal connector; designed for specific Siemens systems.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure the Siemens S7-1500 PLC and corresponding I/O module are powered off.
  2. Verify that the I/O module has a standard 35mm width for mounting.
  3. Carefully align the Siemens 6ES7592-1AM00-0XB0 connector with the designated connection points on the I/O module.
  4. Gently push the connector onto the module until it securely latches into place. You should hear or feel a click.
  5. Connect the sensor and actuator wires to the appropriate terminals on the front connector, following the wiring diagram provided with your PLC system.
  6. Once all wiring is complete, power on the PLC system.

Compatibility:

  • This connector is specifically designed for the Siemens S7-1500 PLC range.
  • It requires a standard 35mm wide I/O module.
  • Ensure compatibility with the specific I/O module type being used within the S7-1500 system.

Care:

  • Keep the connector clean and free from dust and debris. Use a dry, lint-free cloth for cleaning.
  • Avoid exposing the connector to excessive moisture or corrosive environments.
  • Periodically check wire connections for tightness, especially in high-vibration environments.
  • When detaching, ensure you follow the correct procedure to avoid damaging the connector or module.

Price History

DatePrice
Visit shop