Pond Netting Kit - Black - 3m x 4m

The mesh size is 7mm x 5mm, designed to keep out predators and large debris.

Each kit contains UV-stabilized soft black netting and steel pegs to secure it.

If no ground is available for the pegs, you will need to find alternative ways to fasten the netting, such as using weights, stones, or tying it to surrounding structures.

Yes, the netting is designed to protect fish from predators and does not harm them if installed correctly.

It will significantly reduce the amount of leaves and debris falling into your pond, making maintenance easier. However, very small particles or wind-blown debris may still enter.

The netting is UV stabilized, which helps to extend its lifespan when exposed to sunlight. However, lifespan can vary based on environmental conditions and maintenance.

This particular kit is sized at 3m x 4m and includes 12 steel pegs.

Ensure pegs are firmly secured and evenly spaced. Consider adding an extra peg in the center or using a temporary support if the span is too large.

Water the ground slightly to soften it, or use a rubber mallet to gently tap the pegs in. If the ground is very hard, consider alternative securing methods.

Check for gaps in the netting or around the edges. Ensure the netting is pulled taut and secured properly. Smaller debris may require manual removal.

Repair small tears with UV-resistant tape or heavy-duty thread. For significant damage, consider replacing the netting.