Setup, Compatibility & Care
Setup and Compatibility
Before beginning installation, ensure your sink is of the non-overflow variety. Align the waste unit with the sink hole and apply plumber's putty or a silicone gasket if recommended for your sink material. Insert the 41mm fixing screw through the center of the basket strainer and tighten it into the waste body until secure. Ensure the rubber seals are positioned correctly to prevent leaking. Test the seal by filling the sink halfway with water and observing the area underneath for moisture.
Care Instructions
Regular maintenance is essential for longevity. Remove the basket daily to clear trapped food scraps. Use a non-abrasive sponge and mild dish detergent to clean the stainless steel surface. Avoid using harsh chemicals or steel wool, as these can dull the finish or damage the metal surface over time.