For Jeep Wrangler TJ Bumper End 1997-2006 Driver and Passenger Side Pair/Set - KarParts360 - 55155757AB
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners of 1997-2006 Jeep Wrangler TJ models looking to replace their front bumper ends. The key benefit is a direct fit, primed plastic replacement pair that meets OEM specifications, ready for custom painting. A potential caveat is that these are unpainted and require professional or DIY painting to match your vehicle's aesthetic.
All features
| Model Part Number | 55155757AB |
|---|---|
| Brand | KarParts360 |
Extended Product Information
FAQs
Are these bumper ends pre-painted?
No, these bumper ends come primed and ready for paint. You will need to paint them to match your vehicle's color or your desired custom finish.
What is the material of these bumper ends?
The bumper ends are constructed from durable plastic.
Do I get a pair for both the driver and passenger sides?
Yes, this is a set that includes both the front driver and passenger side bumper ends.
Will this fit my 2007 Jeep Wrangler?
No, this set is specifically designed for Jeep Wrangler TJ models from 1997 to 2006. It will not fit a 2007 model or newer JK models.
What are the OEM part numbers this replaces?
This set replaces OEM part numbers 55155757AB (Passenger) and 55155756AB (Driver).
Are these parts DOT and SAE approved?
Yes, these parts meet or exceed DOT & SAE compliance standards.
Can I install these myself?
Yes, with basic automotive tools and mechanical knowledge, these bumper ends can typically be installed by the owner. Professional installation is also an option.
Troubleshooting
Bumper end does not fit correctly.
Verify the vehicle year and model match the product specifications (1997-2006 Jeep Wrangler TJ). Ensure no obstructions or damage are present on the vehicle's bumper mounting points. Compare with the original part for alignment differences.
Paint does not adhere well to the bumper end.
Ensure the surface was properly cleaned and de-greased before painting. The part comes primed, but a light sanding with fine-grit sandpaper (e.g., 320-400 grit) may be necessary to ensure optimal adhesion. Ensure proper paint and primer types are used for plastic application.
Difficulty removing old bumper ends.
Inspect the old bumper ends for hidden clips or fasteners. Use appropriate trim removal tools to avoid damaging the vehicle's paint or body panels. Consult a service manual for specific removal instructions for your Jeep Wrangler TJ model.
Pros and Cons
Pros
- Direct fit for 1997-2006 Jeep Wrangler TJ.
- Primed surface allows for easy and custom painting.
- Meets DOT & SAE compliance standards for quality and safety.
- Replaces specific OEM and Partslink numbers for guaranteed compatibility.
- Sold as a pair (driver and passenger side) for complete replacement.
Cons
- Requires painting to match vehicle color.
- Plastic material may be less durable than original metal components in extreme off-road conditions.
- Installation may require basic mechanical skills or tools.
Setup, Compatibility & Care
Compatibility:
- Vehicle Fitment: This bumper end set is specifically designed for 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, and 2006 Jeep Wrangler TJ models.
- Replaces OEM Parts: 55155757AB (Passenger Side), 55155756AB (Driver Side).
- Replaces Partslink Numbers: CH1004128 (Passenger Side), CH1005128 (Driver Side).
Setup (Installation):
- Ensure your vehicle is safely supported on jack stands if necessary.
- Carefully remove any retaining clips or screws holding the old bumper ends in place.
- Gently detach the old bumper ends.
- Align the new KarParts360 bumper ends with the bumper structure.
- Secure the new bumper ends using appropriate clips or screws (may require reusing original hardware or purchasing new).
- If painting, ensure the surface is clean and properly primed before applying automotive paint.
Care:
- Cleaning: Clean with mild soap and water. Avoid abrasive cleaners that could damage the plastic or paint finish.
- Painting: If painted, follow standard automotive painting procedures for best results. Re-painting may be necessary if the finish is scratched or damaged.