Rustins G4 Pond Sealer - Clear - 1kg

1kg of G4 Pond Sealer covers approximately 1.8 m² with the recommended three coats.

No, G4 Pond Sealer is not suitable for direct application onto concrete blocks. The blocks must be cement rendered first.

G4 Pond Sealer can be applied at temperatures as low as 0°C, but the ideal temperature for application is between 10°C and 25°C.

For optimal performance, three coats are recommended.

Yes, G4 Pond Sealer uses the moisture in the air and substrate to cure, so it can be applied to slightly damp surfaces.

Drying time varies depending on temperature and humidity. Allow sufficient time for each coat to dry before applying the next. Refer to the product label for specific drying times.

Clean tools immediately after use with a suitable solvent.

Store the product in a cool, dry place. Ensure the container is properly sealed when not in use.

Ensure the surface is properly prepared, clean, and free from loose particles. Lightly abrade the surface before application if needed. Ensure the product is not past its expiration date.

Ensure adequate ventilation. Low temperatures and high humidity can increase drying time. Ensure that each coat has sufficient time to dry before applying the next.

Apply the sealer evenly, avoiding excessive application. Ensure the application tool is clean and in good condition.