Snowdon Timber Garden Treated Decking Board - 3.6M - 120mm - 28mm

Yes, once the boards have dried out sufficiently after installation, you can apply an exterior wood paint or stain.

Pressure treatment forces preservatives deep into the timber fibers, significantly increasing resistance to rot, decay, and insect damage.

Yes, always apply a brush-on wood preservative to any cut ends to ensure the integrity of the timber is not compromised.

While pressure-treated, it is standard practice to keep decking boards slightly raised from direct ground contact to improve airflow.

Measure the total area of your deck and divide by the width of the board (120mm), then add 10% to account for cuts and wastage.

Ensure they are stacked horizontally on level supports off the ground with airflow between layers.

Ensure you are using high-quality stainless steel or marine-grade screws specifically designed for treated timber.

This is a natural reaction to UV light; clean the deck and apply a tinted decking oil or stain to restore the color.