Ronseal Multi Purpose Wood Filler - Oak - 465g

Yes, provided the painted surface is sound and clean. Lightly sanding the area before application will improve adhesion.

Drying time can vary depending on the depth of the repair and environmental conditions (temperature, humidity). Generally, it is ready for sanding and finishing within a few hours.

This filler is designed for cosmetic repairs and filling holes or imperfections, not for structural applications where the wood's integrity is compromised.

The 'Oak' color is a general shade. It's best to test on an inconspicuous area or be prepared to paint, stain, or varnish over it to achieve a perfect match.

Yes, the filler provides a tough, weatherproof finish and is suitable for exterior use.

Keep the container tightly sealed in a cool, dry place away from direct sunlight and extreme temperatures to maintain its consistency.

It is not recommended to mix different wood fillers as their formulations may vary, potentially affecting performance and durability.

Ensure the lid was sealed properly after the last use. If stored for a very long time in suboptimal conditions, a small amount of water may need to be added and mixed thoroughly, though this is not ideal. It is best to use a fresh tub if the product has become excessively hard.

This is uncommon for this product. Ensure the filler was applied in a single layer no thicker than recommended for the depth of the repair. For very deep holes, apply in layers, allowing each to cure. Ensure the wood surface was clean and sound before application.

The wood surface may not have been properly prepared. Ensure it was clean, dry, and free from dust, grease, or loose paint. For very smooth or glossy surfaces, a light sanding beforehand will improve adhesion.

Allow the filler to cure fully before attempting to sand. Use fine-grit sandpaper for a smooth finish. If needed, a second thin application can be applied after the first has cured and been lightly sanded.