U-Pol Raptor Truck Bed Liner Kit Aerosol - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The U-Pol Raptor Truck Bed Liner Kit Aerosol is designed for automotive enthusiasts and DIYers seeking a professional-grade protective coating without the complexity of spray guns or compressors. This 2K urethane system offers exceptional durability and scratch resistance, acting as a robust barrier against corrosion, impacts, and weather damage for truck beds and vehicle panels. While it provides a convenient application method, the aerosol format requires careful planning and surface preparation to ensure the desired texture and thickness are achieved across larger surface areas.
All features
| Colour | White |
|---|---|
| Model Part Number | U-Pol Raptor White Truck Bed Liner Kit Aerosol |
| Brand | U-Pol |
Extended Product Information
FAQs
Do I need to use a primer with this kit?
While it can adhere to many surfaces, using a suitable etch primer is recommended on bare metal for optimal corrosion protection.
Can I use this on plastic surfaces?
Yes, but ensure you use an appropriate plastic adhesion promoter to ensure the liner bonds correctly to the substrate.
How long does it take to cure?
The product is touch dry within a few hours, but it requires at least 24-48 hours to fully cure and reach its maximum hardness.
Is this product UV resistant?
Yes, the Raptor 2K system is designed to be UV stable, preventing it from fading or chalking when exposed to sunlight.
Can I spray this over existing paint?
Yes, provided the existing paint is sound, clean, and has been scuffed to provide a 'tooth' for the Raptor liner to grip onto.
Troubleshooting
Uneven texture or clumping
Ensure you are shaking the can for the full recommended time and maintain a consistent spraying distance from the surface.
Poor adhesion or peeling
This is usually caused by inadequate surface preparation; ensure all loose rust, grease, and clear coats are sanded and cleaned prior to application.
Clogged nozzle
Periodically turn the can upside down and spray for a few seconds to clear the nozzle if it starts to sputter during long applications.
Pros and Cons
Pros
- No external spray equipment required
- Excellent resistance to mechanical damage and scratches
- Provides a clean, white aesthetic finish
- High-quality 2K urethane formula
- Easy to apply for automotive DIY projects
Cons
- Limited coverage area compared to bulk spray systems
- Requires proper surface preparation for maximum adhesion
- Once activated, the aerosol must be used within its pot-life window
- Difficult to achieve uniform texture on very large surfaces
Setup, Compatibility & Care
To ensure the best results, start by thoroughly cleaning the target surface with a degreaser and scuffing it with a medium-grit sandpaper (around P80–P180) to promote mechanical adhesion. Mask off all surrounding areas with high-quality automotive tape to avoid overspray. To activate the 2K system, follow the specific instructions on the aerosol can to release the hardener into the resin. Shake the can vigorously for at least two minutes before beginning your application. After spraying, hold the can at the recommended distance to ensure even distribution. For maintenance, keep the coating clean with mild soap and water, avoiding harsh solvents that may compromise the cured urethane surface.