CDA HN6013FR Induction Hob - Black

You must use cookware that is induction-compatible. This usually means that a magnet will stick to the bottom of the pot or pan.

Use a damp cloth or a specific glass-ceramic hob cleaner. Wipe up spills immediately.

Check the power supply and ensure the hob is plugged in. Consult the troubleshooting section of this guide.

Select the desired cooking zone and then activate the booster function via the touch controls. Refer to the user manual for specific instructions.

The Stop'n Go function pauses cooking and maintains the current heat settings. You can resume cooking later by reactivating the function.

Yes, the hob has a child lock feature. Refer to the user manual for instructions on how to activate and deactivate the child lock.

The dimensions are 44 x 592 x 522 mm. The installation compartment dimensions are 560 x 490 x 55 mm

Precision Melt Programme (40 degrees), Precision Keep Warm Programme (70 degrees), Precision Simmer Programme (90 degrees).

Check the power supply. Ensure the hob is plugged in and the socket is working. Check your circuit breaker.

Check if the cookware is induction-compatible. Ensure the cookware is correctly placed on the cooking zone. Verify that the child lock is not activated.

Consult the user manual for specific error codes and solutions. It may indicate a technical fault and may require a service call.

Ensure your hands are dry. Clean the control panel. If the issue persists, try resetting the hob by switching off the power at the mains for a few minutes and then turning it back on.