Self Adhesive Draft Excluder Foam - ST HELENS HOME AND GARDEN - GH1662
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners seeking to improve energy efficiency and reduce noise in their homes using the ST HELENS HOME AND GARDEN self-adhesive draft excluder. The key benefit is preventing drafts and reducing noise, potentially leading to lower heating costs. Keep in mind that while it's easy to install, it's essential to prepare the surface for optimal adhesion.
All features
| Model Part Number | GH1662 |
|---|---|
| Brand | St Helens Home and Garden |
Extended Product Information
FAQs
How long does the draft excluder last?
The lifespan depends on usage and environmental conditions, but it typically lasts for several years.
Can I paint over the draft excluder?
It is not recommended to paint over it, as it may affect its adhesion and effectiveness.
Is the adhesive strong?
The adhesive is designed to provide a strong and lasting bond but surface preparation is key.
Can I use this on a metal door?
Yes, it is suitable for use on metal doors, provided the surface is clean and dry.
What if I make a mistake during installation?
Carefully remove the excluder and reposition it, ensuring proper surface preparation.
Is it safe for use around children and pets?
Yes, the materials used are generally safe, but avoid direct contact with the adhesive.
How do I clean the draft excluder?
Use a damp cloth to wipe the surface. Avoid harsh chemicals or abrasive cleaners.
Troubleshooting
The excluder is not sticking properly.
Ensure the surface is clean and dry before application. Press firmly along the entire length after applying.
The excluder is falling off.
Clean and degrease the surface, ensure correct application, and consider using additional adhesive if necessary.
Drafts are still present after installation.
Check for gaps and ensure the excluder is correctly positioned and sealed. Multiple layers may be needed for large gaps.
The excluder is too short.
Measure the required length correctly before cutting. Overlap multiple pieces if needed.
Pros and Cons
Pros
- Easy to install with self-adhesive backing.
- Improves energy efficiency by preventing drafts.
- Reduces noise pollution from external sources.
- Cost-effective solution for home improvement.
- Durable and long-lasting foam material.
- Helps to maintain a more comfortable indoor environment.
Cons
- Adhesion may be affected by extreme temperatures or humidity.
- Requires proper surface preparation for optimal sticking.
- May need to be replaced periodically due to wear and tear.
- Appearance is limited to white color.
- Not suitable for extremely large gaps.
- Effectiveness depends on proper application and maintenance.
Setup, Compatibility & Care
- Preparation: Clean the surface of the door or window frame thoroughly. Ensure it's free from dust, dirt, and grease. Using a clean cloth and a suitable cleaning agent is recommended.
- Measurement: Measure the area where the excluder will be applied.
- Cutting: Cut the foam to the required length using scissors or a utility knife.
- Application: Peel off the backing and carefully apply the adhesive side to the cleaned surface. Press firmly along the entire length to ensure good adhesion.
- Compatibility: This product is compatible with most door and window frames. The self-adhesive backing adheres well to painted wood, metal, and plastic surfaces.
- Care: Regularly check the excluder for any signs of wear and tear. Clean the surface with a damp cloth as needed. Avoid using abrasive cleaners.