BlueSpot SDS Masonry Drill Bit - 8mm x 260mm
Best current price£6.03from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£6.03Visit shop B&Q - Blue Spot ToolsSds Masonry Drill Bit (8mm X 260mm)
Visit shopB&Q£6.03Visit shop One Offer
1 offer from £6.03
View price history by clicking the chart icon.
B&QB&Q - Blue Spot ToolsSds Masonry Drill Bit (8mm X 260mm)
Free delivery in 1–3 days
£6.03
Visit shop
Product Information
Full details
The BlueSpot SDS Masonry Drill Bit (8mm x 260mm) is designed for professional and DIY users tackling tough masonry tasks. Its primary benefit is exceptional durability and efficient drilling through hard materials like concrete and stone, thanks to its high-quality carbide construction. A key consideration is ensuring your drill is SDS-compatible for optimal performance and secure fitting.
All features
| Brand | BlueSpot |
|---|
Extended Product Information
FAQs
What materials can I use this drill bit on?
This drill bit is specifically designed for use on masonry, concrete, mortar, brick, and stone.
Do I need a special drill for this bit?
Yes, this bit requires an SDS-compatible rotary hammer drill. It will not fit in a standard drill chuck.
How do I clean the drill bit after use?
Wipe the drill bit clean of dust and debris with a dry cloth. Store in a dry location.
What does 'SDS' mean?
SDS stands for Slotted Drive System. It's a type of chuck system that allows for quick bit changes and efficient power transfer, especially for hammer drills.
How long will this drill bit last?
The lifespan depends on usage frequency, material hardness, and proper technique. The high-quality carbide steel and tip are designed for durability, but replacement is necessary when the tip becomes dull or damaged.
Can I use this bit for wood or metal?
No, this bit is specifically designed for masonry and hard materials. Using it on wood or metal can damage the bit and the material.
Troubleshooting
Drill bit does not lock into SDS chuck
Ensure the drill chuck is clean and free of debris. Verify that your drill is an SDS-compatible model. Try a slight twisting motion as you insert the bit.
Slow drilling or bit not penetrating material
Confirm you are using the drill in hammer mode (if applicable). Ensure the bit is sharp and not excessively worn. Reduce pressure slightly to allow the hammer action to work effectively. Check for material hardness beyond the bit's intended use.
Excessive vibration or wobbling
Re-seat the drill bit to ensure it is locked correctly. Check the drill chuck for wear or damage. Ensure the drill bit itself is not bent.
Pros and Cons
Pros
- Exceptional durability due to heat-treated carbide steel.
- Efficient drilling performance on hard masonry materials.
- Secure and quick bit changes with SDS shank.
- Designed for longevity and resistance to wear.
- Suitable for a variety of masonry applications.
Cons
- Requires an SDS-compatible drill; not usable with standard chucks.
- May wear faster on extremely abrasive materials like granite without proper cooling.
- Specific size (8mm x 260mm) limits its use to appropriate hole diameters and depths.
Setup, Compatibility & Care
Setup:
- Ensure your drill is an SDS-compatible rotary hammer.
- Insert the SDS shank of the drill bit into the drill's chuck.
- Push the bit in and twist slightly until it locks securely into place. You should hear or feel a click.
Compatibility:
- This drill bit is designed for use with SDS-Plus or SDS-Max chuck systems (verify compatibility with your specific drill model, though most 8mm bits are SDS-Plus).
- It is *not* compatible with standard three-jaw chucks found on non-rotary hammer drills.
Care:
- After use, remove any dust and debris from the bit.
- Store in a dry place to prevent rust.
- Periodically check the carbide tip for any damage or excessive wear. Replace if compromised.
- Avoid overheating by using a steady pressure and allowing the drill's hammer action to do the work. For prolonged use, consider intermittent cooling.