Berger Liquid Gloss - Black

Berger Liquid Gloss is specifically designed for interior and exterior woods and metals. While it might adhere to some plastics with proper surface preparation and primer, it is not its intended use, and results may vary. Testing on a small, inconspicuous area is recommended.

It can be applied by brush or roller. For a smooth, high-sheen finish, use a good quality synthetic brush or a short-pile roller, applying in thin, even coats. Ensure consistent direction of brush strokes.

Drying times can vary depending on temperature and humidity. Typically, it is touch-dry in 2-4 hours and ready for a second coat in 4-6 hours. Allow longer drying times in cooler or more humid conditions.

It is ideal for interior and exterior woods and metals, providing a tough and durable finish.

It is not recommended to mix Berger Liquid Gloss with other paint types or colours, as this can compromise the finish and durability. For custom colours, it is best to explore Berger's range of available colours.

Yes, its tough and durable nature makes it suitable for high-traffic areas like doors, staircases, and furniture, provided the surface is properly prepared and primed.

Unfortunately, due to geographical restrictions, Berger Liquid Gloss cannot be delivered to Ireland, the Isle of Wight, or the Isle of Man.

Ensure the surface was properly prepared, clean, and dry. Use an appropriate primer for the substrate (wood or metal). Check for any contaminants like grease or dust.

Apply paint in thin, even coats. Use a good quality brush or roller designed for gloss paints. Ensure paint is stirred thoroughly. Avoid over-spreading the paint.

Ensure application is done in optimal conditions (recommended temperature and humidity). Thick coats, low temperatures, or high humidity can significantly increase drying times.

Stir the paint thoroughly. If necessary, thin slightly with a small amount of appropriate thinner as recommended by the manufacturer, but avoid over-thinning as this can affect durability.