Best current price£383.92from eBay
Shopping.co.uk recommended and popular offers
eBay£383.92Visit shop Proram Performance Filter Intake Induction Kit For BMW 1/2/3/4 Series 2.0T B48
Visit shop2 offers from £383.92
View price history by clicking the chart icon.
The RamAir PRORAM Performance Induction Kit is designed for automotive enthusiasts looking to enhance their vehicle's engine responsiveness and power output through improved airflow dynamics. This kit offers a significant upgrade over restrictive factory airboxes by providing increased horsepower, torque, and a more aggressive induction sound, making it ideal for both street and track applications. While the system provides robust performance gains, users should note that the increased induction noise may be more prominent than stock, and routine maintenance of the nanofibre filter is required to sustain peak efficiency.
| Model Part Number | PRK-318-BK |
|---|---|
| Brand | RamAir |
While the kit will provide performance benefits on a stock tune, an ECU remap is recommended to fully optimize the air-fuel ratio and extract maximum horsepower.
The kit is designed for performance use; however, regulations vary by region. Please check your local automotive modification laws before installation.
It is recommended to inspect the filter every 5,000 miles, or more frequently if driving in dusty or off-road conditions.
Modifying your vehicle's induction system may affect manufacturer warranty coverage for related engine components. Consult your dealer for specific information.
Yes, the PRORAM kit is specifically engineered for both road and track use, focusing on high-flow and consistent performance under load.
Ensure the Mass Air Flow (MAF) sensor is properly connected and that all silicone couplers are air-tight to prevent vacuum leaks.
Check all mounting bolts on the heat shield and intake pipe to ensure they are fully tightened and that no components are touching the engine bay walls.
Verify that no debris is blocking the intake opening and ensure that all electrical connections near the air intake are secure.
Installation of the PRK-318-BK is straightforward, as the kit is designed to utilize existing factory mounting points, minimizing the need for specialized tools. Begin by removing the stock airbox assembly, being careful to retain any original sensors or clips needed for the new system. Secure the heat shield first, then install the aluminium intake pipe, ensuring the black silicone couplers are tightened to prevent air leaks.
For maintenance, the nanofibre filter should be inspected during every oil change. To clean, remove the filter and use a vacuum or low-pressure compressed air to remove loose dust. If the filter is heavily soiled, it can be cleaned with a specialized filter cleaning kit. Do not use excessive oil or harsh detergents, as this can degrade the nanofibre material.
