Best current price£13.99from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£13.99Visit shop Frost Extreme Chassis Black Spray Paint - Satin Black, Satin Black, Black
Visit shop3 offers from £13.99 - £19.64
View price history by clicking the chart icon.
Frost Extreme Chassis Spray Paint is an ideal solution for automotive enthusiasts and mechanics looking to protect and restore vehicle undercarriages, suspension arms, and axle casings. The formula provides a durable, professional-grade satin finish that shields components from environmental hazards like mud, salt, and stone chips. While it offers exceptional resistance to automotive fluids and extreme temperatures, the product requires a clean, rust-free surface to ensure optimal adhesion and long-term durability.
| Colour | Black |
|---|---|
| Model Part Number | P775 |
| Brand | Frost |
| Container Volume | 500ml |
Yes, provided the existing paint is sound, clean, and well-keyed by light sanding.
It can be applied directly to clean, bare metal, though a suitable metal primer can be used for added corrosion protection.
Yes, it is designed to withstand temperatures up to 150 degrees Celsius.
Drying times vary based on ambient temperature and humidity, but it is generally touch-dry within 30-60 minutes.
While it handles 150°C, it is primarily designed for chassis and suspension; check your specific engine component temperatures before use.
Store in a cool, dry place away from direct sunlight and clear the nozzle before storage to ensure future use.
Remove the nozzle and soak it in a solvent like acetone or thinners, or replace it with a spare nozzle.
This usually indicates the surface was not fully degreased or was damp during application; sand the area back, clean thoroughly, and reapply.
You are likely applying the coats too heavily; move the can faster across the surface or apply thinner coats from a greater distance.
Before application, ensure the substrate is completely clean and free of dirt, grease, and rust. For best results, use a degreaser followed by a light sanding if the metal surface is oxidized. Shake the aerosol can vigorously for at least two minutes before starting. Apply in light, sweeping coats, holding the can approximately 20-30 centimeters away from the surface. Allow sufficient drying time between coats to prevent running. Once finished, clear the nozzle by turning the can upside down and spraying until the propellant comes out clear to prevent the tip from clogging.
