Best current price£7.49from eBay
Shopping.co.uk recommended and popular offers
eBay£7.49Visit shop Slitting Metal Cutting Discs 115mm 4.5 Inch Spectre Ultra Thin 1.0mm 10pc Tin
Visit shop1 offer from £7.49
View price history by clicking the chart icon.
The Spectre 115mm thin profile cutting disc is designed for professional metalworkers and serious DIY enthusiasts who require high-precision cuts in steel and stainless steel. Its standout feature is the 1mm ultra-thin profile, which allows for exceptionally fast, accurate material removal with a minimal burr, though users must exercise caution to prevent disc breakage caused by side-loading or excessive pressure during operation.
| Model Part Number | SP-17203 |
|---|---|
| Brand | Spectre |
Yes, these discs are specifically formulated to cut stainless steel efficiently without causing unnecessary heat buildup.
No, these are strictly cutting discs. Using the side of the disc for grinding is dangerous and will cause the disc to break.
These discs are rated for a maximum speed of 13,300 RPM (80m/Sec).
They fit most standard angle grinders that accept 115mm discs with a 22mm bore diameter.
Used discs should be disposed of in accordance with local metal recycling and hazardous waste regulations.
The 1mm thickness reduces the amount of material being removed during the cut, which significantly increases cutting speed and improves precision.
Ensure you are not applying excessive pressure; allow the disc to cut naturally and verify that the angle of the cut is perfectly straight.
Check that the disc is centered correctly on the flange and the locking nut is tightened securely. Inspect the disc for visible cracks before use.
Use a light touch to score the metal surface first, which creates a groove to guide the disc before applying full pressure.
To install, ensure your 115mm angle grinder is disconnected from any power source. Remove the outer locking nut and existing disc, then place the Spectre disc onto the spindle, ensuring it is properly seated against the flange. Replace and tighten the locking nut securely.
Regarding compatibility, these discs are designed for any standard 115mm angle grinder that utilizes a 22mm bore mounting system. For care, always store the discs in the provided metal tin to prevent the abrasive material from absorbing moisture from the air, which can compromise the integrity of the bond over time. Avoid dropping the tin, as physical impact can create microscopic cracks in the discs that may lead to failure during high-speed rotation.
