Surface mounted 3/6A secondary telephone socket with screw connections. This flush mounted socket ...Surface mounted 3/6A secondary telephone socket with screw connections. This flush mounted socket is used for extending a telephone line and fits on a standard single UK back box. It is not suitable for replacing a master socket. Dimensions: 20x85x85mm. Connectors: Screw Terminals.
This guide is for anyone needing to extend a telephone line using the kenable Secondary Telephone BT Socket. The primary benefit is a simple and tidy way to add a secondary phone connection. A key caveat is that this socket is *not* designed to replace your master socket.
All features
Model Part Number
008353
Brand
kenable
Extended Product Information
FAQs
What is this socket used for?
This socket is designed to extend an existing telephone line. It is not designed to replace your master socket.
What tools are needed for installation?
You will need a screwdriver to connect the wires to the screw terminals.
Can I use this socket for broadband?
This socket is designed for telephone lines. It may not be suitable for broadband, depending on your setup. Consult with your ISP.
What size back box is required?
The socket fits a standard single UK back box.
How do I connect the wires?
Strip a small amount of insulation from the telephone wires and insert them into the screw terminals, tightening them to secure the connection.
Is this socket weatherproof?
No, this socket is not weatherproof. It is designed for indoor use.
Troubleshooting
No dial tone.
Check the wiring connections at the screw terminals. Ensure the wires are properly connected and that the incoming phone line is active.
Poor voice quality or static.
Check the connections for loose wires. Ensure that the wires are properly stripped and making good contact with the terminals. If problems persist, consider replacing the socket.
Pros and Cons
Pros
Easy to install.
Provides a neat and professional finish.
Reliable screw terminal connections.
Compatible with standard UK back boxes.
Cons
Not suitable for replacing a master socket.
Requires a compatible back box for installation.
May require basic wiring knowledge.
Limited to extending a telephone line; no other functionalities.
Setup, Compatibility & Care
Installation: The socket fits into a standard single UK back box. Ensure the back box is securely mounted.
Wiring: Connect the telephone wires to the screw terminals. Make sure the wires are securely fastened.
Compatibility: Compatible with standard UK telephone wiring and back boxes.
Care: Keep the socket clean and free from dust. Do not expose the socket to moisture. Always turn off the power supply before any installation or maintenance.