PylePro 5 inch Drive Midrange Driver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This PylePro 5-inch Drive Midrange Driver is designed for audio enthusiasts and custom car audio builders seeking clear mid-frequency reproduction. Its key benefit is delivering precise vocal and instrument clarity within a sound system. A potential consideration is its specialized nature, requiring integration into a compatible speaker enclosure and crossover system for optimal performance.
All features
| Brand | Pyle |
|---|
Extended Product Information
FAQs
What is a midrange driver?
A midrange driver is a type of loudspeaker driver specifically designed to reproduce the range of frequencies typically associated with human voices and most musical instruments, usually between 300 Hz and 3000 Hz.
Can I use this driver as a full-range speaker?
No, this is a dedicated midrange driver. It requires other drivers (like a woofer for bass and a tweeter for treble) and a crossover network to reproduce the full audible sound spectrum.
What is the impedance of this driver?
This PylePro driver has an 8-ohm impedance.
How do I mount this driver?
You will need to cut an appropriate hole in your speaker enclosure and mount the driver using screws through the provided mounting holes, ensuring a secure and airtight seal.
What is the benefit of a sealed back design?
A sealed back design helps to isolate the sound waves from the rear of the driver, preventing them from interfering with the sound from the front. This can lead to a cleaner sound and better control within the enclosure.
What is the voice coil made of?
The voice coil is made of high-temperature aluminum.
Troubleshooting
No sound from the driver
Verify wiring connections to the crossover and amplifier. Ensure the crossover is correctly sending mid-range frequencies to this driver. Check amplifier settings and ensure the channel is active.
Distorted sound
Check for proper crossover point settings to ensure the driver is not receiving frequencies outside its range. Inspect wiring for loose connections. Ensure the driver is securely mounted and not vibrating against the enclosure.
Reduced volume or poor output
Confirm amplifier power output is sufficient. Check impedance compatibility between the driver and amplifier. Ensure the cone is not obstructed and can move freely.
Pros and Cons
Pros
- Clear mid-range frequency response ideal for vocals and instruments.
- Durable construction with high-temperature voice coil.
- Sealed back design aids in better sound isolation and enclosure integration.
- Standard 8-ohm impedance for broad compatibility.
Cons
- Requires a dedicated speaker enclosure and crossover for proper function.
- May need complementary drivers (tweeter, woofer) for a full-range sound system.
- Paper cone may be susceptible to moisture damage if not protected.
- Specific T/S parameters not provided, making DIY enclosure design challenging without further data.
Setup, Compatibility & Care
Setup: This driver is intended for installation within a custom or pre-fabricated speaker enclosure. Ensure the enclosure is designed to accommodate a 5-inch driver with an appropriate cutout diameter and mounting depth. It requires integration into a multi-way speaker system with a crossover network to filter frequencies, preventing damage and ensuring it only receives the mid-range signals it's designed for. Wire the driver according to standard polarity (+ to +, - to -) to your crossover's mid-range output.
Compatibility: The driver features an 8-ohm impedance, making it compatible with most amplifiers and receivers designed for standard speaker loads. However, its use is contingent on a proper crossover design. It's recommended for use in systems where mid-frequency reproduction is critical, such as home audio, professional sound reinforcement, or custom car audio installations.
Care: Keep the driver cone and surrounding materials clean and dry. Avoid exposure to excessive moisture or dust. If cleaning is necessary, use a soft, dry cloth to gently wipe away any accumulated dust. Do not use liquid cleaners or solvents directly on the cone or surround, as this can degrade the materials and affect performance.