Michelin DH Mud TLR Tyre - 29x2.40
Best current price£81.99from Leisure Lakes Bikes
Best offers
Shopping.co.uk recommended and popular offers
Leisure Lakes Bikes£81.99Visit shop Michelin DH Mud TLR Tyre Black
Visit shopLeisure Lakes Bikes£81.99Visit shop All Offers
4 offers from £81.99
View price history by clicking the chart icon.
Michelin DH Mud TLR Tyre BlackFree delivery in 1–3 days£81.99Visit shop →
Michelin DH Mud TLR Tyre BlackFree delivery in 1–3 days£81.99Visit shop →
Michelin DH Mud TLR Tyre BlackFree delivery in 1–3 days£81.99Visit shop →
Product Information
Full details
The Michelin DH Mud TLR Tyre is engineered for downhill mountain bike racers and gravity enthusiasts who frequent the muddiest and steepest tracks imaginable. Featuring a specialized 2.4-inch wide profile and an aggressive, tall-spike tread pattern, this tyre delivers exceptional traction and braking control in soft, sloppy conditions. While it is a world-class performer in wet weather, its highly specialized tread design means it is not recommended for hard-pack trails or dry, rocky terrain where it may feel sluggish and wear down prematurely.
All features
| Model Part Number | MIC-399994 |
|---|---|
| Brand | MICHELIN |
Extended Product Information
FAQs
Can I use this tyre on dry, dusty trails?
While it will technically fit, the tall knobs are prone to folding on hard surfaces, leading to vague handling and rapid wear.
What is the recommended tyre pressure?
Pressure depends on rider weight and rim width, but most gravity riders start between 22-26 PSI for a balance of support and grip.
How do I cut the blocks?
Use a sharp, specialized tyre cutting tool or flush-cut side cutters to trim the blocks to the desired height for a specific track surface.
Is this tyre compatible with 27.5-inch rims?
No, this is a 29-inch specific tyre (622mm bead seat diameter).
Does it come with a tube?
No, it is a tubeless-ready tyre; while it can be used with an inner tube, it performs best in a tubeless setup.
Troubleshooting
Difficulty seating the tyre bead during tubeless setup
Use a soapy water solution around the bead area and remove the valve core to increase airflow during inflation.
Sealant weeping from the sidewalls
This can happen with new tyres; rotate the wheel to coat the internal sidewalls evenly and ensure enough sealant is present.
Tyre feels squirmy in corners
Check your tyre pressure. If too low, the tall knobs may fold under high cornering loads; increase PSI by 1-2 units.
Pros and Cons
Pros
- Unrivaled traction on loose, wet, and muddy surfaces
- High-performance rubber compound maintains grip at high speeds
- Reinforced casing handles heavy downhill impacts
- Tubeless-ready design supports lower pressure setups
- Customizable tread blocks for specific track conditions
Cons
- Not suitable for dry, hard-packed, or rocky trails
- Higher rolling resistance compared to intermediate or dry-condition tyres
- Tread wear can be accelerated on non-muddy surfaces
Setup, Compatibility & Care
This tyre is designed for 29-inch wheels with a standard 61-622 ETRTO fitment. For optimal performance, it should be set up as a tubeless system. Ensure your rims are compatible with tubeless tape and use a high-quality liquid sealant to ensure an airtight seal.
- Clean the rim bed thoroughly to ensure the tubeless tape is seated correctly.
- Install the tyre, seating the beads firmly into the center channel of the rim.
- Add the recommended amount of sealant via the valve stem.
- Inflate using a high-volume pump or compressor to seat the beads against the rim sidewall.
- Check pressures before each ride; due to the casing stiffness, small variations in PSI can significantly change the 'feel' of the grip.
Store the tyres away from direct sunlight and ozone-producing equipment to maintain the integrity of the Magi-X compound.