Shopping.co.uk

Trend Trimmer Router Cutter - 12.7mm x 25.4mm - C116X1/4TC

Trend Trimmer Router Cutter - 12.7mm x 25.4mm - C116X1/4TC

Trend CraftPro 1/4" Shank Trimmer Router Cutter for flush trimming of laminate, lippings and venee...

Best current price£13.95from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

59 offers from £13.95 - £48.02

View price history by clicking the chart icon.

eBayTrend Craft Pro C167X1/4TC 6.35mm Dia. x 12.7mm Cut Guided Trimmer
Free delivery in 1–3 days
£13.95
Visit shop
Power Tools DirectTrend Guided Trimmer 6.35Mm Diameter X 12.7Mm Pk 1 C167x1/4Tc
£6.95 delivery
£20.69
Visit shop
OnBuy.comTrend Router Bit, 1/4", 12.7Mm Dia C134x1/4Tc By
Free delivery in 1–3 days
£21.33
Visit shop
alanwadkinstoolstore.co.ukTrend C167X1/4TC 1/4" Shank Guided Trimmer Router Cutter 6.35mm D
£6.89 delivery
£21.54
Visit shop
Tooled UpTrend CRAFTPRO Bearing Guided Trimmer Router Cutter 6.35mm 12.7mm 1/4"
£5.95 delivery
£24.95
Visit shop

Product Information

Full details

This guide is for woodworkers and DIY enthusiasts looking to achieve clean, flush trims on laminate, lippings, and veneers using the Trend CraftPro C116X1/4TC Trimmer Router Cutter. The primary benefit is its ability to deliver precise and smooth edges. However, users should be mindful of the cutter's depth and material compatibility for optimal results. This guide will walk you through the features, usage, and maintenance of this router cutter.

All features

Model Part NumberC116X1/4TC
BrandTrend

Extended Product Information

FAQs

What materials can I use this cutter on?

This cutter is designed for use with laminate, lippings, and veneers.

How do I install the cutter in my router?

Insert the cutter's shank into the router's collet and tighten securely.

How do I adjust the cutting depth?

Adjust the router's depth setting to control the amount of material removed. Use the 'K' mark on the shank as a guide.

How should I clean the cutter?

Clean the cutter with a soft cloth after each use to remove resin and debris.

What is the purpose of the PTFE coating?

The PTFE coating minimizes heat and resin build-up, extending the cutter's lifespan and improving performance.

What shank size does this cutter have?

The cutter has a 1/4" shank.

Where can I find replacement parts?

Replacement parts are not typically needed. The cutters are designed to last a long time. However, if needed, contact the manufacturer.

Troubleshooting

Cutter is not trimming flush.

Check if the bearing is damaged. Check the depth setting and make sure the cutter is properly installed.

Cutter leaves burn marks on the material.

Reduce the feed rate or cutting depth. Make sure the cutter is sharp and clean.

Cutter is vibrating excessively.

Ensure the cutter is securely tightened in the collet. Check for any damage to the cutter.

Pros and Cons

Pros

  • Provides clean and accurate flush trimming.
  • PTFE coating reduces friction and heat.
  • Durable construction for long-term use.
  • Easy to control with a 1/4" shank.

Cons

  • Limited to trimming specific materials (laminate, lippings, veneers).
  • Requires a router for use.

Setup, Compatibility & Care

  1. Router Compatibility: Ensure the router is compatible with a 1/4" shank.
  2. Installation: Securely insert the cutter into the router's collet, ensuring it's properly tightened.
  3. Depth Adjustment: Adjust the router's depth to control the cutting depth, ensuring it matches the thickness of the material being trimmed. Use the 'K' mark as a reference for safe cutting practices.
  4. Material Compatibility: This cutter is designed for use with laminate, lippings, and veneers.
  5. Care and Maintenance:
  • After each use, clean the cutter with a soft cloth to remove any resin or debris.
  • Store the cutter in a dry place to prevent rust.
  • Inspect the cutting edges regularly for sharpness and damage.

Price History

DatePrice
Visit shop