GoodHome Poprock Stone Terrazzo Stone Effect Self-Adhesive Vinyl Tile - 1.3M²

Yes, they can be installed over existing smooth, hard, and sealed flooring, provided the surface is clean, dry, and perfectly flat. Avoid installing over carpet, linoleum that is peeling, or heavily textured surfaces.

Wipe them regularly with a damp cloth. For tougher spots, use a mild detergent solution and rinse with a clean damp cloth. Avoid abrasive cleaners.

Use a sharp utility knife and a metal ruler for straight cuts. Score the tile surface multiple times along the marked line, then carefully snap or cut the rest of the way through.

Each tile covers 1.3m². Measure the area of your room in square meters and divide by 1.3 to determine the number of tiles needed. Always add an extra 10% for cuts and potential waste.

Yes, they are suitable for bathrooms, but ensure the floor is exceptionally well-prepared and dry before installation, and avoid prolonged exposure to standing water.

You can carefully lift and reposition a tile within a short time after application if the adhesive has not fully bonded. However, repeated repositioning may weaken the adhesive. Ensure the surface remains clean and intact.

Ensure the subfloor is perfectly clean, dry, smooth, and free of any residues. Re-press the tile firmly. If the issue persists, the subfloor may not be suitable.

Carefully lift the affected tile and reapply, pressing firmly from the center outwards to push out any trapped air. Ensure the surface is smooth.

Use a sharp, heavy-duty utility knife and a straight edge. Score the tile multiple times rather than trying to cut through in one go for cleaner edges.

Check that each tile is aligned correctly with the previous one before pressing down. Minor adjustments can be made before the adhesive fully sets.