SRAM 11 Speed Chain - PC-X1 - 118 Links with Powerlink

The PowerLock® link is a SRAM-designed connecting link that allows you to easily install and remove the chain without tools.

Clean and lubricate your chain regularly, ideally after every few rides or when it becomes dirty.

Use a chain wear indicator tool to check for stretch. Replace the chain when it reaches the wear limit specified by the manufacturer.

No, this chain is specifically designed for 1X11-speed systems.

You must remove the excess links. Refer to the instructions to determine the correct chain length for your bike's drivetrain configuration.

Insert the PowerLock® link into the chain ends and pull them together. It is recommended to use chain pliers to lock the PowerLock® link.

Check for chain wear, bent links, or damaged cassette cogs. Adjust the rear derailleur or replace the chain if necessary.

Ensure the chain ends are properly aligned and the link is seated correctly. Use chain pliers if needed.

Inspect for damaged chain links. Ensure that the chain length is correct for your bike setup. Check your shifting habits and avoid cross-chaining.