Best current price£36.90from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£36.90Visit shop Trend Guided Profiler Pk 1 Tr29x1/4Tc
Visit shop
B&Q£42.16Visit shop B&Q - Tr29 X 1/4 Tct Shank Mounted Bearing Guided Profiler 12.7 X 25.4mm
Visit shop21 offers from £36.90 - £82.95
View price history by clicking the chart icon.
The Trend Shank Mounted Bearing Guided Profiler (TR30X1/2TC) is designed for professional woodworkers and cabinetry makers who require precise edge trimming and profiling on large workpieces. Its standout benefit is the extra-long 50mm cutting length combined with high-durability micro-grain tungsten carbide tips, allowing for deep, clean cuts on demanding abrasive materials. A primary caveat for users is that the 1/2-inch shank requires a compatible heavy-duty router collet, making it unsuitable for smaller laminate or trim routers.
| Model Part Number | TR30X1/2TC |
|---|---|
| Brand | Trend |
No, this bit features a 1/2-inch shank and is only compatible with routers equipped with a 1/2-inch collet.
It is suitable for hardwood, softwood, fibreboard, plywood, and particle board.
The cutting length is 50.0mm.
The PTFE coating helps minimize heat buildup and prevents wood resin from sticking to the bit, which helps maintain sharpness.
Yes, Trend replacement bearings are available if the existing bearing becomes worn or seized.
Reduce the feed rate and ensure the cutter is not taking too much material in a single pass.
Clean the bearing with a non-petroleum based solvent and verify the screw is secure but not overtightened.
Ensure your router is capable of accepting a 1/2-inch shank bit. To set up, insert the shank into the collet, leaving at least 15mm of the shank length within the collet for stability before tightening. When using, always ensure the bearing rotates freely before powering on the tool. For maintenance, keep the bearing free of sawdust and resin by using a specialized router bit cleaner. After extended use, inspect the tungsten carbide tips for chips. Always store the bit in its original packaging or a dedicated bit case to prevent damage to the cutting edges.
