Shopping.co.uk

Davant Solvent Waste Internal Screwed Access Plug - 40mm - White

Davant Solvent Waste Internal Screwed Access Plug - 40mm - White

This 40mm white plastic solvent waste internal screwed access plug allows access to clean or drain...

Best current price£1.22from City Plumbing GB

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
City Plumbing GB£1.22Visit shop

Plumbright White Solvent Weld Waste Internal Screwed Access Plug 40Mm Pwp40iwb

Visit shop

One Offer

1 offer from £1.22

View price history by clicking the chart icon.

City Plumbing GBPlumbright White Solvent Weld Waste Internal Screwed Access Plug 40Mm Pwp40iwb
Free delivery in 1–3 days
£1.22
Visit shop

Product Information

Full details

This guide is for anyone using the Davant Solvent Waste Internal Screwed Access Plug. The key benefit of this plug is its easy access for cleaning and draining pipework. A point to note is that this plug is specifically designed for 40mm pipe fittings. This guide will walk you through the features, uses, and care of your Davant plug.

All features

Model Part NumberPWP40IWB
BrandDavant

Extended Product Information

FAQs

What size pipe is this plug compatible with?

This plug is specifically designed for use with 40mm solvent waste pipes.

What material is the plug made of?

The plug is made of white plastic.

Do I need any special tools to install this plug?

You'll need solvent cement suitable for PVC or ABS pipes, depending on your pipe material.

How do I clean the access plug?

You can clean the plug with warm, soapy water. Avoid using abrasive cleaners.

What is the purpose of the internal screw?

The internal screw allows for easy removal and installation of the plug.

Where can I use this access plug?

It can be used in residential and commercial plumbing systems for easy access to drain lines.

Is the white color a standard for all applications?

The white color is standard, but you may need to consider your existing pipework's color for aesthetics.

Troubleshooting

Plug leaks after installation.

Ensure a sufficient amount of solvent weld was applied. Tighten the plug slightly (without over-tightening) and check for proper seal.

Plug is difficult to screw in.

Check the threads on the plug and the pipe fitting for any obstructions or damage. Ensure you are using the correct solvent cement.

The plug cracks or breaks.

Avoid over-tightening the plug during installation. If the plug is damaged, replace it with a new one.

Pros and Cons

Pros

  • Provides easy access for pipe maintenance.
  • Durable white plastic construction.
  • Simple to install and use.
  • Ensures a watertight seal.
  • Cost-effective solution.

Cons

  • Only compatible with 40mm pipes.
  • Requires solvent weld for installation (sold separately).
  • Plastic material may be susceptible to damage if over-tightened.
  • White color may not match all existing pipework colors.

Setup, Compatibility & Care

Setup:

  1. Ensure the 40mm pipe is clean and free of debris.
  2. Apply solvent weld adhesive to the inside of the pipe fitting and the outside of the plug's thread.
  3. Screw the access plug into the fitting until snug. Do not overtighten.
  4. Allow the solvent weld to cure according to the manufacturer's instructions.

Compatibility:

  • Compatible with 40mm solvent waste pipes.
  • Use with appropriate solvent cement for PVC or ABS pipes.

Care:

  • Inspect the plug periodically for any signs of damage or wear.
  • Clean the plug with warm, soapy water if necessary.
  • Avoid using abrasive cleaners or harsh chemicals.

Price History

DatePrice
Visit shop