Best current price£41.98from eBay
Shopping.co.uk recommended and popular offers
eBay£41.98Visit shop U-Pol RS6103 Ultra Fast Rapid System Premium Body Filler Repairs 3 Litre Upol
Visit shop2 offers from £41.98 - £45.73
View price history by clicking the chart icon.
The U-Pol RAPID10 Premium Body Filler is designed for automotive technicians and DIY enthusiasts who require high-speed curing times without compromising on finish quality. This product offers a significant advantage in repair turnaround efficiency, allowing for rapid sanding and final finishing, though users should note that the fast-curing nature requires quick, precise application techniques to avoid premature hardening in the mixing tray.
| Model Part Number | RAPID10 |
|---|---|
| Brand | U-Pol |
This product is primarily designed for automotive metal surfaces. Check the technical data sheet for compatibility if applying to specific automotive plastics.
Yes, each 3-litre container comes with the necessary hardener to ensure the product cures correctly.
Due to its rapid-cure design, you can typically begin sanding shortly after application, depending on ambient temperature and humidity.
No, do not add solvents or thinners to the product as this will compromise the chemical structure and curing process.
Store in a cool, dry, well-ventilated area with the lid securely closed to prevent moisture contamination.
Reduce the amount of hardener slightly (while remaining within manufacturer recommendations) or mix smaller batches at a time.
Ensure the ratio of hardener is correct and verify that the product was mixed thoroughly until a uniform color was achieved.
Before application, ensure the substrate is clean, dry, and free from rust or oil by sanding the area with an appropriate grit sandpaper and cleaning with a degreaser. Mix the filler with the supplied hardener following the specific ratio indicated on the container to ensure proper catalysis. Apply the filler in thin, even layers to build up depth rather than one thick application. After finishing, seal the container tightly and store in a cool, dry place away from direct sunlight to maintain the integrity of the chemical components.
